1
The prompt on this page opens in SpeakCAD already filled in — after sign-in too. The model renders in your browser. Preview is free.Kitchen & home
KitchenAid Artisan bowl-lift splash guard
This is not a fixed STL. SpeakCAD generates the kitchenaid artisan bowl-lift splash guard to your millimetres, you adjust it in the chat, then you download and print it.2
Change any millimetre in the chat: wall thickness, hole size, the thing it clips onto. Iterations stay in the tab until it matches what you own.Adjust
3Print
Download a watertight STL or 3MF for 2 credits, drop it in your slicer, and print it. Small fit fixes re-download free.Get it nowThe example prompt comes with you, even through sign-in. Preview is free; a download costs 2 credits.
What a kitchenaid artisan bowl-lift splash guard is
A 220 mm splash ring that sits on a 4.8 L Artisan bowl-lift bowl with a 30 mm pour gap and a 6 mm beater clearance. Print in two PETG halves that clip.
Flour on the hinge is a pain. Describe the bowl in SpeakCAD, preview the ring in the browser without paying, then download the STL.
Example prompt
Model a 220 mm splash ring in two halves, 30 mm pour gap, 6 mm beater clearance, 1.6 mm PETG, clip joint.
People also search
kitchenaid splash guard stlartisan bowl lift splash ring 3d printkitchenaid flour guardbowl lift splash cover 3d model
Questions people ask about a kitchenaid artisan bowl-lift splash guard
A 220 mm splash ring that sits on a 4.8 L Artisan bowl-lift bowl with a 30 mm pour gap and a 6 mm beater clearance. Print in two PETG halves that clip.
Click Get it now on this page: the example prompt is filled in for you after you sign in. The model renders in your browser — nothing to install — and previewing is free. Adjust any millimetre in the chat, then export a watertight STL or 3MF for 2 credits when you want to print.
Start from this working example and replace any number with what you measured: Model a 220 mm splash ring in two halves, 30 mm pour gap, 6 mm beater clearance, 1.6 mm PETG, clip joint.
Flour on the hinge is a pain. In SpeakCAD you generate and preview for free, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More kitchen & home
Cotton swab dispenser with lift lidA bathroom box that stores cotton swabs upright.DeLonghi Dedica 51 mm dosing funnel ring for the portafilterA dosing funnel that sits on the 51 mm basket of a DeLonghi Dedica EC685 or EC885 and stops ground coffee from spilling over the rim while you fill and distr…Nespresso Original capsule carousel for 40 podsA 180 mm carousel that holds 40 Original-line capsules in two stacked rings of 20, each pocket 17.5 mm with 0.3 mm clearance.Roborock Q Revo 20 mm threshold rampA 400 × 80 × 20 mm ramp that lets a Q Revo climb a 20 mm doorway bar.KitchenAid tilt-head bowl rest padA pad that sits under a tilt-head KitchenAid bowl (4.3 or 4.8 L) so the bowl does not spin on a stone counter while you scrape.Ninja Foodi PossibleCooker lid standA stand that parks a PossibleCooker lid (about 260 mm) on its side so the condensation drips into the pot, not the counter.