Gaggia Classic 58 mm tamper stand and portafilter holder
A combined tamper stand and portafilter rest for the Gaggia Classic Pro or any machine using a 58 mm basket, including Rancilio Silvia and Lelit. The portafilter recess is 62 mm wide with a 40 mm opening for the spouts, so the basket sits level and the handle rests flat on the counter. The tamper sits base-down in a 59 mm pocket with a 1 mm rounded edge to protect a polished piston. A separate 45 mm bay takes a WDT tool, and four 8 mm feet give the base a footprint of 160 by 100 mm with 3 mm walls. Print flat, top surface up.
A generated stand can be dimensioned around your exact tamper handle and portafilter, rather than forcing a file made for someone else's kit. In SpeakCAD you describe both, preview the model in the browser at no charge, refine pocket depth or add a funnel slot in the chat and download the STL or 3MF.
Create a base 160 mm wide, 100 mm deep and 40 mm tall with 3 mm walls, a 62 mm diameter portafilter recess 22 mm deep with a 40 mm spout opening, a 59 mm tamper pocket 25 mm deep with a 1 mm rounded edge, a 45 mm round bay for a WDT tool and four 8 mm feet.