1
Kitchen & home
Dyson Airwrap Complete Long stand
A counter stand that holds a Dyson Airwrap Complete Long (about 41 mm handle, 270 mm long) barrel-up so the cord does not yank it over. The well is 44 mm ID and 40 mm deep, the base is 110 × 90 mm with a 12 mm cord notch, and a 70 × 18 mm trough parks two barrels. Print in one piece in PETG with 2.4 mm walls. Open the ready-made model free, resize it on your phone or computer, then download a print-ready STL, 3MF or G-code sliced for your printer, free.Opening the ready-made model and downloading it as STL or 3MF are free, no card; AI changes use credits, from Maker at $7.99 a month.No printer? We print this part and ship it to your door. See its priceUpdated
2
Adjust
Change its numbers in the viewer for free, or ask the AI in the chat: wall thickness, hole size, the thing it clips onto. AI changes use 2 credits per request (1 for a quick edit, 3 for a redesign), paid with a plan from Maker at $7.99 a month, where the first 3 small changes are free.3Print
Download a watertight STL or 3MF free, with your numbers and hand edits, or G-code sliced for your printer at the same price. After an AI change the download is included in every plan (4 credits without one).
Dimensions of the ready-made model (editable)
| Parameter | Value |
|---|---|
| Base length (X) | 110 mm |
| Base width (Y) | 90 mm |
| Base height (Z) | 50 mm |
| Base corner rounding radius | 4 mm |
| Well diameter | 44 mm |
| Well depth | 40 mm |
| Cord notch width | 12 mm |
| Cord notch depth into back wall | 14 mm |
| Cord notch height from base bottom | 20 mm |
| Trough length | 70 mm |
| Trough width | 18 mm |
| Trough depth into top | 10 mm |
Example prompt
Model an Airwrap Complete Long stand 110×90×50 mm, 44 mm well 40 mm deep, 12 mm cord notch, 70×18 mm barrel trough, 2.4 mm PETG.
Fit notes
A curling-iron cup is too narrow and the Airwrap tips. Tell SpeakCAD Long vs short, preview the stand in the browser, then download the STL.
Questions people ask about a Dyson Airwrap Complete Long stand
A counter stand that holds a Dyson Airwrap Complete Long (about 41 mm handle, 270 mm long) barrel-up so the cord does not yank it over. The well is 44 mm ID and 40 mm deep, the base is 110 × 90 mm with a 12 mm cord notch, and a 70 × 18 mm trough parks two barrels. Print in one piece in PETG with 2.4 mm walls.
Click Open it free on this page and create a free account (no card): the ready-made model opens in your browser, on your phone or computer, nothing to install. Change its numbers in the viewer for free and download a watertight STL or 3MF free, or G-code sliced for your printer at the same price. An AI change in the chat uses 2 credits per request (3 for a redesign), and the download after it is included in every plan (4 credits without one). Start with Maker: 50 credits a month for $7.99, cancel anytime.
On this page: open the ready-made model free in a SpeakCAD account (no card), change any dimension in the viewer, then download the STL or 3MF free, or G-code sliced for your printer at the same price.
A shared STL is modelled for someone else's measurements. Here you open the ready-made model free, change it to your measurements in the viewer, then download a file sized for the part you actually own, free as STL or 3MF.
Yes. SpeakCAD slices the part on its servers with OrcaSlicer and your printer's official profile (380+ printers, including Bambu Lab, Prusa, Creality and Elegoo), and you download the G-code (a sliced .gcode.3mf for Bambu Lab printers). G-code sliced for your printer costs the same as the STL: included in every plan, free for a part you shaped by hand, 4 credits without a plan for a part with AI work in it. Pick your printer on the printers page to see its profile.
No. SpeakCAD runs in the browser on your phone or computer: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL, 3MF or sliced G-code.
Print it your way
More kitchen & home
Instant Pot lid holder that hooks on the side handleReady-made, opens free. A hook that slides over the side handle of an Instant Pot Duo or Ninja Foodi and holds the lid upright at the side of the base while you stir or serve, so co…AeroPress Go travel funnel capReady-made, opens free. A funnel cap that replaces the AeroPress Go's drinking lid so you can fill the chamber from a hotel kettle without spilling.IKEA SKUBB hanger-connector clipReady-made, opens free. A clip that joins two SKUBB hangers vertically so a second row of clothes hangs under the first.Family toothbrush holder with drip drainReady-made, opens free. A counter stand that separates four toothbrushes and a tube of toothpaste so heads never touch and water drips through rather than pooling.Pot lid rack for cabinet or counterReady-made, opens free. A rack that stands saucepan lids on edge in a row.Dolce Gusto pod drawer that sits under the machineReady-made, opens free. A low storage drawer sized for the wide Dolce Gusto capsule, which is about 54 mm across the top and 35 mm tall, so it never fits in racks made for Nespresso.