1
The prompt on this page opens in SpeakCAD already filled in — after sign-in too. The model renders in your browser. Preview is free.Kitchen & home
Instant Pot Duo Plus lid wall holder
This is not a fixed STL. SpeakCAD generates the instant pot duo plus lid wall holder to your millimetres, you adjust it in the chat, then you download and print it.2
Change any millimetre in the chat: wall thickness, hole size, the thing it clips onto. Iterations stay in the tab until it matches what you own.Adjust
3Print
Download a watertight STL or 3MF for 2 credits, drop it in your slicer, and print it. Small fit fixes re-download free.Get it nowThe example prompt comes with you, even through sign-in. Preview is free; a download costs 2 credits.
What a instant pot duo plus lid wall holder is
A holder that hangs a Duo Plus lid (about 240 mm) on a cabinet door so the sealing ring dries and the lid is not on the hob. The hook is 20 mm with two 4.5 mm holes on 60 mm centres. Print in PETG with 2.4 mm walls.
The Pro Crisp lid stand is a different lid. Describe 6 vs 8 qt in SpeakCAD, preview the holder in the browser for free, then download the STL.
Example prompt
Create a Duo Plus lid wall holder, 20 mm hook, two 4.5 mm holes on 60 mm centres, 2.4 mm PETG.
People also search
instant pot duo plus lid holder stlduo plus lid wall mount 3d printinstant pot lid hangerduo plus lid hook 3d model
Questions people ask about a instant pot duo plus lid wall holder
A holder that hangs a Duo Plus lid (about 240 mm) on a cabinet door so the sealing ring dries and the lid is not on the hob. The hook is 20 mm with two 4.5 mm holes on 60 mm centres. Print in PETG with 2.4 mm walls.
Click Get it now on this page: the example prompt is filled in for you after you sign in. The model renders in your browser — nothing to install — and previewing is free. Adjust any millimetre in the chat, then export a watertight STL or 3MF for 2 credits when you want to print.
Start from this working example and replace any number with what you measured: Create a Duo Plus lid wall holder, 20 mm hook, two 4.5 mm holes on 60 mm centres, 2.4 mm PETG.
The Pro Crisp lid stand is a different lid. In SpeakCAD you generate and preview for free, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More kitchen & home
Senseo coffee pad dispenser tube for 18 padsA vertical tube with an open front slot that stacks Senseo pads and lets you slide the bottom one out with a thumb.Philips Avent baby bottle drying rack with nipple pegsA compact drying rack for Philips Avent Natural bottles with pegs for the wide nipples, screw rings and caps that always end up in a puddle beside the sink.SodaStream Terra bottle drying treeA tree that holds three Terra / Duo bottles upside down on 22 mm pegs 80 mm tall with a 140 mm drip tray.Dyson Outsize wand floor standA floor stand that holds a Dyson Outsize wand and the extra-wide Motorbar so the taller vacuum does not lean on a wall.Vitamix Ascent A3500 cup drying treeA tree that dries two Ascent blending cups (about 600 ml, 80 mm ID) plus the blade bases so they are not in the dishwasher rack on their blades.Stackable fridge egg holder trayA tray that stores a dozen eggs in individual cups inside the fridge.