1
Kitchen & home
Aqara door and window sensor magnet spacer
This is not a fixed STL. SpeakCAD generates the aqara door and window sensor magnet spacer to your millimetres, you adjust it in the chat, then you download and print it.Building the 3D preview…
2
Adjust
Click a part and change its numbers in the viewer, or ask the AI in the chat: wall thickness, hole size, the thing it clips onto. AI changes use plan credits.3Print
Download a watertight STL or 3MF with a Maker or Pro plan, drop it in your slicer, and print it. Small fit fixes re-download free.
Get it nowOpening the ready-made model is free. A plan covers AI changes and the download.
Example prompt
Design an Aqara door sensor magnet spacer 32×12 mm, 10 mm tall, 30×10 mm magnet pocket with 0.3 mm clearance, flat adhesive base.
What a aqara door and window sensor magnet spacer is
A spacer that lifts the Aqara door and window sensor magnet (about 30 × 10 × 8 mm) so it lines up with the sensor body (about 41 × 22 × 11 mm) on a recessed door or window sash. The spacer is 32 × 12 mm with a 0.3 mm pocket for the magnet, comes in 5, 10 or 15 mm, and takes the stock adhesive pad underneath. Print in PLA, pocket up.
The P2 Matter sensor is a different size, so measure yours first. Open the model in SpeakCAD at no cost, set the gap in the chat or the viewer, then download the STL.
People also search
aqara door sensor spacer stlaqara magnet spacer 3d printdoor sensor magnet riseraqara window sensor shim 3d model
Questions people ask about a aqara door and window sensor magnet spacer
A spacer that lifts the Aqara door and window sensor magnet (about 30 × 10 × 8 mm) so it lines up with the sensor body (about 41 × 22 × 11 mm) on a recessed door or window sash. The spacer is 32 × 12 mm with a 0.3 mm pocket for the magnet, comes in 5, 10 or 15 mm, and takes the stock adhesive pad underneath. Print in PLA, pocket up.
Click Get it now on this page and sign in: you can open the ready-made model for free, and the example prompt is filled in if you want the AI to redesign it. The model renders in your browser, nothing to install. Change any millimetre in the viewer or the chat (AI changes use plan credits), then export a watertight STL or 3MF with a Maker or Pro plan when you want to print.
Start from this working example and replace any number with what you measured: Design an Aqara door sensor magnet spacer 32×12 mm, 10 mm tall, 30×10 mm magnet pocket with 0.3 mm clearance, flat adhesive base.
The P2 Matter sensor is a different size, so measure yours first. In SpeakCAD you open the ready-made model for free, change it to your measurements, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More kitchen & home
KitchenAid stand mixer bowl cover lid with pour chuteA splash lid for the 4.8 litre bowl of a KitchenAid Artisan tilt-head mixer that clips onto the rim and lets you add flour through a chute while the beater r…Fellow Stagg EKG drip-tray gridA 90 × 70 × 6 mm grid that sits on a Stagg EKG base and lets drips fall through 4 mm slots instead of staining the metal.Dyson Airwrap Complete Long standA counter stand that holds a Dyson Airwrap Complete Long (about 41 mm handle, 270 mm long) barrel-up so the cord does not yank it over.Vitamix Explorian E310 blade-cover standA stand that holds an E310 container (about 180 mm across the blade) upside down with a 40 mm blade clearance so the jar dries without dulling the blade on t…Tea bag dispenser box with front slotA countertop box that holds a stack of wrapped tea bags and dispenses one at a time from a slot at the bottom.Weighted napkin holder with hinged barA tabletop holder that keeps a stack of napkins tidy on a patio.