1
Kitchen & home
Weighted napkin holder with hinged bar
A tabletop holder that keeps a stack of napkins tidy on a patio. The base is 175 mm square with 1.5 mm walls and a 12 mm deep hollow underside for sand or washers, sealed by a snap-in cover; a weighted arm on a print-in-place hinge swings up and rests on the stack. The bar is 20 mm wide with 4 mm fillets, the hinge pin is 4 mm with 0.4 mm clearance, and both parts print upright. Open the ready-made model free, resize it on your phone or computer, then download a print-ready STL, 3MF or G-code sliced for your printer, free.Opening the ready-made model and downloading it as STL or 3MF are free, no card; AI changes use credits, from Maker at $7.99 a month.No printer? We print this part and ship it to your door. See its priceUpdated
2
Adjust
Change its numbers in the viewer for free, or ask the AI in the chat: wall thickness, hole size, the thing it clips onto. AI changes use 2 credits per request (1 for a quick edit, 3 for a redesign), paid with a plan from Maker at $7.99 a month.3Print
Download a watertight STL or 3MF free, with your numbers and hand edits, or G-code sliced for your printer at the same price. After an AI change the download is included in every plan (4 credits without one).
Dimensions of the ready-made model (editable)
| Parameter | Value |
|---|---|
| overall width | 175 mm |
| overall length | 175 mm |
| overall height | 20 mm |
| wall thickness | 1.5 mm |
| corner fillet radius | 4 mm |
| depth of hollow underside | 12 mm |
| floor separating cavity from napkin bay | 1.5 mm |
| snap-in cover plate thickness | 1.5 mm |
| clearance around cover | 0.3 mm |
| retaining rib height | 1.4 mm |
| how far rib protrudes inward | 1.2 mm |
| hinge pin diameter | 4 mm |
| radial clearance for free knuckle | 0.4 mm |
| knuckle boss radius | 5 mm |
Example prompt
Design a napkin holder 175 x 175 mm and 20 mm tall with 1.5 mm walls, a 12 mm deep hollow underside with a snap-in cover, a 20 mm wide weighted arm on a 4 mm print-in-place hinge pin with 0.4 mm clearance, 4 mm fillets.
Fit notes
Cocktail napkins, lunch napkins and paper serviettes come in different folded sizes, so a holder generated to yours grips the stack neatly. Tell SpeakCAD the napkin size and how heavy you want the base, preview it in the browser, ask for a curved bar or a salt and pepper recess, and download the STL when it fits.
Questions people ask about a weighted napkin holder with hinged bar
A tabletop holder that keeps a stack of napkins tidy on a patio. The base is 175 mm square with 1.5 mm walls and a 12 mm deep hollow underside for sand or washers, sealed by a snap-in cover; a weighted arm on a print-in-place hinge swings up and rests on the stack. The bar is 20 mm wide with 4 mm fillets, the hinge pin is 4 mm with 0.4 mm clearance, and both parts print upright.
Click Open it free on this page and create a free account (no card): the ready-made model opens in your browser, on your phone or computer, nothing to install. Change its numbers in the viewer for free and download a watertight STL or 3MF free, or G-code sliced for your printer at the same price. An AI change in the chat uses 2 credits per request (3 for a redesign), and the download after it is included in every plan (4 credits without one). Start with Maker: 50 credits a month for $7.99, cancel anytime.
On this page: open the ready-made model free in a SpeakCAD account (no card), change any dimension in the viewer, then download the STL or 3MF free, or G-code sliced for your printer at the same price.
A shared STL is modelled for someone else's measurements. Here you open the ready-made model free, change it to your measurements in the viewer, then download a file sized for the part you actually own, free as STL or 3MF.
Yes. SpeakCAD slices the part on its servers with OrcaSlicer and your printer's official profile (380+ printers, including Bambu Lab, Prusa, Creality and Elegoo), and you download the G-code (a sliced .gcode.3mf for Bambu Lab printers). G-code sliced for your printer costs the same as the STL: included in every plan, free for a part you shaped by hand, 4 credits without a plan for a part with AI work in it. Pick your printer on the printers page to see its profile.
No. SpeakCAD runs in the browser on your phone or computer: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL, 3MF or sliced G-code.
Print it your way
More kitchen & home
Self-draining soap dish with raised ribsReady-made, opens free. A bathroom soap dish that lets bar soap dry between uses.Gravity-fed fridge can dispenserReady-made, opens free. A two-lane rack that stores canned drinks in the fridge and rolls the next one forward as you take one.Dolce Gusto pod drawer that sits under the machineReady-made, opens free. A low storage drawer sized for the wide Dolce Gusto capsule, which is about 54 mm across the top and 35 mm tall, so it never fits in racks made for Nespresso.Vitamix tamper holder clip for the container baseReady-made, opens free. A clip that holds the Vitamix tamper upright next to the motor base so it is never rolling around a drawer or lying wet on the counter.Gaggia Classic Pro steam-wand tip clipReady-made, opens free. A clip that parks a Classic Pro steam wand over a 60 mm rinse cup so the tip does not drip on the cup warmer.IKEA RÅSKOG handle hook pairReady-made, opens free. Two hooks that clip onto a RÅSKOG handle and hold a towel or a bag, 12 mm snap and a 20 mm hook.