1
Kitchen & home
AeroPress stand with paper filter holder and cap slot
A countertop stand that keeps an AeroPress Original or Clear chamber, plunger, filter cap and paper filters together in one spot. The main bore is 64 mm to clear the roughly 62 mm chamber, a second 48 mm pocket takes the plunger, and a 72 mm dish holds the filter cap. A slot 66 mm wide and 12 mm deep holds a stack of 100 paper filters, protected by a small roof. The stand is 150 by 90 mm with a 3 mm floor and 1.6 mm walls; a 2 mm drainage slot under each bore lets the chamber dry after rinsing. Print upright with no supports. Open the ready-made model free, resize it on your phone or computer, then download a print-ready STL, 3MF or G-code sliced for your printer, free.Opening the ready-made model and downloading it as STL or 3MF are free, no card; AI changes use credits, from Maker at $7.99 a month.No printer? We print this part and ship it to your door. See its priceUpdated
2
Adjust
Change its numbers in the viewer for free, or ask the AI in the chat: wall thickness, hole size, the thing it clips onto. AI changes use 2 credits per request (1 for a quick edit, 3 for a redesign), paid with a plan from Maker at $7.99 a month.3Print
Download a watertight STL or 3MF free, with your numbers and hand edits, or G-code sliced for your printer at the same price. After an AI change the download is included in every plan (4 credits without one).
Dimensions of the ready-made model (editable)
| Parameter | Value |
|---|---|
| length | 150 mm |
| width | 90 mm |
| height | 60 mm |
| corner rounding | 6 mm |
| floor thickness | 3 mm |
| upper stage, from top of dish floor | 20 mm |
| slot width | 2 mm |
| slot height at bottom of small bore | 6 mm |
| length of slot cut, radial | 20 mm |
| center height of slot | 30 mm |
Example prompt
Design a stand 150 mm long, 90 mm wide and 60 mm tall with a 64 mm bore and a 48 mm bore each 40 mm deep with 2 mm drainage slots, a 72 mm shallow dish for the filter cap, a filter slot 66 x 12 mm and 30 mm deep, 1.6 mm walls and a 3 mm floor.
Fit notes
AeroPress accessories such as Fellow Prismo caps or metal filters change what you need to store, and a generated stand can include them. In SpeakCAD you list the parts you own, preview the stand in the browser, ask for a wall-hung version in the chat and download the STL.
Questions people ask about an AeroPress stand with paper filter holder and cap slot
A countertop stand that keeps an AeroPress Original or Clear chamber, plunger, filter cap and paper filters together in one spot. The main bore is 64 mm to clear the roughly 62 mm chamber, a second 48 mm pocket takes the plunger, and a 72 mm dish holds the filter cap. A slot 66 mm wide and 12 mm deep holds a stack of 100 paper filters, protected by a small roof. The stand is 150 by 90 mm with a 3 mm floor and 1.6 mm walls; a 2 mm drainage slot under each bore lets the chamber dry after rinsing. Print upright with no supports.
Click Open it free on this page and create a free account (no card): the ready-made model opens in your browser, on your phone or computer, nothing to install. Change its numbers in the viewer for free and download a watertight STL or 3MF free, or G-code sliced for your printer at the same price. An AI change in the chat uses 2 credits per request (3 for a redesign), and the download after it is included in every plan (4 credits without one). Start with Maker: 50 credits a month for $7.99, cancel anytime.
On this page: open the ready-made model free in a SpeakCAD account (no card), change any dimension in the viewer, then download the STL or 3MF free, or G-code sliced for your printer at the same price.
A shared STL is modelled for someone else's measurements. Here you open the ready-made model free, change it to your measurements in the viewer, then download a file sized for the part you actually own, free as STL or 3MF.
Yes. SpeakCAD slices the part on its servers with OrcaSlicer and your printer's official profile (380+ printers, including Bambu Lab, Prusa, Creality and Elegoo), and you download the G-code (a sliced .gcode.3mf for Bambu Lab printers). G-code sliced for your printer costs the same as the STL: included in every plan, free for a part you shaped by hand, 4 credits without a plan for a part with AI work in it. Pick your printer on the printers page to see its profile.
No. SpeakCAD runs in the browser on your phone or computer: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL, 3MF or sliced G-code.
Print it your way
More kitchen & home
Roborock Q Revo 20 mm threshold rampReady-made, opens free. A 400 × 80 × 20 mm ramp that lets a Q Revo climb a 20 mm doorway bar.Family toothbrush holder with drip drainReady-made, opens free. A counter stand that separates four toothbrushes and a tube of toothpaste so heads never touch and water drips through rather than pooling.Pot lid rack for cabinet or counterReady-made, opens free. A rack that stands saucepan lids on edge in a row.Dolce Gusto pod drawer that sits under the machineReady-made, opens free. A low storage drawer sized for the wide Dolce Gusto capsule, which is about 54 mm across the top and 35 mm tall, so it never fits in racks made for Nespresso.Instant Pot lid holder that hooks on the side handleReady-made, opens free. A hook that slides over the side handle of an Instant Pot Duo or Ninja Foodi and holds the lid upright at the side of the base while you stir or serve, so co…AeroPress Go travel funnel capReady-made, opens free. A funnel cap that replaces the AeroPress Go's drinking lid so you can fill the chamber from a hotel kettle without spilling.