Instant Pot lid holder that hooks on the side handle
A hook that slides over the side handle of an Instant Pot Duo or Ninja Foodi and holds the lid upright at the side of the base while you stir or serve, so condensation drips back into the pot. The hook opening is 32 mm wide and 22 mm tall to fit the moulded handle of the 6 quart Duo, and the cradle is a 30 mm wide U-channel that catches the lid rim, which is about 265 mm across. Walls are 3 mm for stiffness against a 1 kg lid, and a 20 mm gusset joins hook and cradle. Print it on its side so layer lines run along the hook.
Handles differ between the Duo, Duo Plus, Pro and 8 quart sizes, so a hook generated from your own handle measurement grips properly. In SpeakCAD you give the handle width and lid diameter, preview the holder in the browser at no cost, adjust the angle in the chat and download the STL or 3MF.
Model a lid holder with a rectangular hook opening 32 mm wide, 22 mm tall and 40 mm deep to fit an Instant Pot Duo 6 quart side handle, joined by a 20 mm gusset to a 30 mm wide U-channel cradle 60 mm long tilted 10 degrees back to hold a 265 mm lid, all with 3 mm walls.