Family toothbrush holder with drip drain
A counter stand that separates four toothbrushes and a tube of toothpaste so heads never touch and water drips through rather than pooling. Brush holes are 18 mm in diameter to clear thick electric brush handles, angled outward 5 degrees so heads fan apart, and the floor slopes into a 30 mm removable drip cup at the back. The toothpaste slot is 40 by 25 mm. Walls are 1.8 mm with 3 mm fillets, and the holder prints upright as one piece with the cup separate.
Electric brushes, manual brushes and children's brushes all have different handle diameters, so SpeakCAD sizes each hole to what your family actually uses. Preview the holder in the browser at no cost, add a fifth hole or a razor slot by asking, then download the STL and print in a moisture-tolerant material.
Create a toothbrush holder 130 x 70 mm and 90 mm tall with four 18 mm holes angled outward 5 degrees, a 40 x 25 mm toothpaste slot, a floor sloping to a 30 mm drip cup that slides out from the back, 1.8 mm walls.