Philips Avent baby bottle drying rack with nipple pegs
A compact drying rack for Philips Avent Natural bottles with pegs for the wide nipples, screw rings and caps that always end up in a puddle beside the sink. The four bottle posts are 20 mm in diameter and 100 mm tall for the roughly 65 mm wide 260 ml bottle, six shorter 12 mm pegs hold nipples and rings, and a 180 by 130 mm tray with a 3 mm lip drains through a spout at one end. Walls are 1.6 mm and the tray is 3 mm; the posts print upright without supports. Use PETG so the rack survives regular hot water and a sterilizer basket.
Bottle brands differ, and a rack generated for Avent will not suit Dr. Brown's or MAM without new post spacing, so describe the bottles you use in SpeakCAD. Preview the rack in the browser at no cost, ask for more pegs or a taller post for 330 ml bottles in the chat, and download the STL or 3MF.
Create a drying rack with a 180 x 130 mm tray 3 mm thick with a 3 mm lip and a drain spout, four 20 mm posts 100 mm tall for inverted Philips Avent Natural bottles, six 12 mm pegs 45 mm tall for nipples and rings, 1.6 mm walls and 2 mm drainage grooves in the tray floor.