1
The prompt on this page opens in SpeakCAD already filled in — after sign-in too. The model renders in your browser. Preview is free.Kitchen & home
Breville Oracle Jet knock-box liner
This is not a fixed STL. SpeakCAD generates the breville oracle jet knock-box liner to your millimetres, you adjust it in the chat, then you download and print it.2
Change any millimetre in the chat: wall thickness, hole size, the thing it clips onto. Iterations stay in the tab until it matches what you own.Adjust
3Print
Download a watertight STL or 3MF for 2 credits, drop it in your slicer, and print it. Small fit fixes re-download free.Get it nowThe example prompt comes with you, even through sign-in. Preview is free; a download costs 2 credits.
What a breville oracle jet knock-box liner is
A liner that drops into the Oracle Jet knock box (about 140 × 90 × 80 mm) so you empty pucks without washing the stainless every shot. The tub is 136 × 86 × 70 mm with a 2 mm lip and 1.6 mm PETG walls.
A Barista Pro knock box is a different size. In SpeakCAD you measure the well, preview the liner in the browser without paying, then download the STL.
Example prompt
Model an Oracle Jet knock-box liner 136×86×70 mm with a 2 mm lip, 1.6 mm PETG.
People also search
oracle jet knock box stlbreville oracle jet liner 3d printoracle jet puck binbreville knock box insert 3d model
Questions people ask about a breville oracle jet knock-box liner
A liner that drops into the Oracle Jet knock box (about 140 × 90 × 80 mm) so you empty pucks without washing the stainless every shot. The tub is 136 × 86 × 70 mm with a 2 mm lip and 1.6 mm PETG walls.
Click Get it now on this page: the example prompt is filled in for you after you sign in. The model renders in your browser — nothing to install — and previewing is free. Adjust any millimetre in the chat, then export a watertight STL or 3MF for 2 credits when you want to print.
Start from this working example and replace any number with what you measured: Model an Oracle Jet knock-box liner 136×86×70 mm with a 2 mm lip, 1.6 mm PETG.
A Barista Pro knock box is a different size. In SpeakCAD you generate and preview for free, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More kitchen & home
Instant Pot Pro Crisp lid standA stand that parks a Pro Crisp air-fryer lid (about 280 mm) on its side so the element cools without scorching the counter.Dyson Supersonic diffuser wall hookA hook that hangs the wide Supersonic diffuser (about 95 mm across) next to the dryer so it is not the thing that never goes back in the box.KitchenAid ice-cream bowl freezer riserA riser that parks the KitchenAid ice-cream freeze bowl (about 210 mm diameter) in a freezer so air can move under it and it freezes faster.Measuring spoon and cup drawer rackA flat rack that lays measuring spoons and cups in graduated nests inside a drawer so the set stays in order.Nespresso Vertuo pod holder drawer under the machineA slim drawer unit that slides under a Nespresso Vertuo Next or Vertuo Pop so the machine sits on top and the capsules live underneath.Instant Pot lid holder that hooks on the side handleA hook that slides over the side handle of an Instant Pot Duo or Ninja Foodi and holds the lid upright at the side of the base while you stir or serve, so co…