Cotton swab dispenser with lift lid
A bathroom box that stores cotton swabs upright. The chamber is 45 mm in diameter and 80 mm tall for 75 mm swabs, with a 60 mm wide lid on a print-in-place pivot that lifts to expose a fan of tips, and a small side compartment 30 by 20 mm for cotton pads. Walls are 1.5 mm with a 3 mm base and 2 mm fillets, and the whole thing prints upright as one piece.
Some households buy long wooden swabs and others short paper ones, and SpeakCAD dimensions the chamber height to yours so the tips always sit just below the lid. Preview the dispenser in the browser for free, request a taller pad compartment or a spring lid, and download the STL when the proportions suit your vanity.
Create a cotton swab dispenser with a 45 mm diameter chamber 80 mm tall, a 60 mm wide lid on a print-in-place 3 mm pivot pin with 0.4 mm clearance, a side compartment 30 x 20 x 50 mm for pads, 1.5 mm walls, 3 mm base.