1
Kitchen & home
Aqara T1 temperature sensor wall frame
This is not a fixed STL. SpeakCAD generates the aqara t1 temperature sensor wall frame to your millimetres, you adjust it in the chat, then you download and print it.Building the 3D preview…
2
Adjust
Click a part and change its numbers in the viewer, or ask the AI in the chat: wall thickness, hole size, the thing it clips onto. AI changes use plan credits.3Print
Download a watertight STL or 3MF with a Maker or Pro plan, drop it in your slicer, and print it. Small fit fixes re-download free.
Get it nowOpening the ready-made model is free. A plan covers AI changes and the download.
Example prompt
Create an Aqara T1 sensor wall frame 44×44×14 mm, 36.5×36.5 mm pocket, 5 mm standoff with air gap, thumb notch, 4 mm screw hole.
What a aqara t1 temperature sensor wall frame is
A wall frame for an Aqara T1 temperature and humidity sensor (about 36 × 36 × 9 mm) that holds it 5 mm off the wall so an outside wall does not drag the reading down. The frame is 44 × 44 × 14 mm with a 36.5 mm pocket, a thumb notch to pop the sensor out for the battery, and a 4 mm screw hole. Print in PLA, 1.6 mm walls.
The older round Xiaomi sensor is a different shape. Open the ready-made frame in SpeakCAD for free, change any millimetre in the viewer or the chat, then download the STL.
People also search
aqara t1 temperature sensor mount stlaqara temperature sensor holder 3d printaqara t1 wall frameaqara humidity sensor mount 3d model
Questions people ask about a aqara t1 temperature sensor wall frame
A wall frame for an Aqara T1 temperature and humidity sensor (about 36 × 36 × 9 mm) that holds it 5 mm off the wall so an outside wall does not drag the reading down. The frame is 44 × 44 × 14 mm with a 36.5 mm pocket, a thumb notch to pop the sensor out for the battery, and a 4 mm screw hole. Print in PLA, 1.6 mm walls.
Click Get it now on this page and sign in: you can open the ready-made model for free, and the example prompt is filled in if you want the AI to redesign it. The model renders in your browser, nothing to install. Change any millimetre in the viewer or the chat (AI changes use plan credits), then export a watertight STL or 3MF with a Maker or Pro plan when you want to print.
Start from this working example and replace any number with what you measured: Create an Aqara T1 sensor wall frame 44×44×14 mm, 36.5×36.5 mm pocket, 5 mm standoff with air gap, thumb notch, 4 mm screw hole.
The older round Xiaomi sensor is a different shape. In SpeakCAD you open the ready-made model for free, change it to your measurements, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More kitchen & home
Instant Pot Vortex Plus basket dividerA divider that splits a Vortex Plus air-fryer basket (about 200 × 200 mm) so fries and chicken do not become one meal.Measuring spoon and cup drawer rackA flat rack that lays measuring spoons and cups in graduated nests inside a drawer so the set stays in order.Nespresso Original capsule dispenser wall mounted gravity feedA vertical gravity dispenser for Nespresso Original capsules that screws or sticks to the wall or the side of a cabinet next to the machine.SodaStream bottle drying rack for two bottlesA rack that holds two upside-down SodaStream bottles so the narrow neck drains and the inside dries, which a dish rack never manages.Cosori Dual Blaze basket-divider clipA clip that holds a silicone liner halfway across a Dual Blaze basket so two foods do not mix.Dyson V15 Detect HEPA filter drying rackA rack that stands a washed V15 Detect post-motor HEPA filter (about 70 mm diameter, 40 mm tall) on edge so it dries before it goes back in the cyclone.