AirPods Pro 2 case belt clip with carabiner hole
A snap-on sleeve for the AirPods Pro 2 charging case (60.6 x 45.2 x 21.7 mm) with a spring belt clip on the back and a 6 mm carabiner hole on top, so the earbuds ride on a bag strap or waistband instead of falling out of a pocket. The sleeve wraps the lower two thirds of the case with 0.3 mm clearance and a 12 mm opening at the bottom for the USB-C port, and the lid still flips freely. Walls are 1.6 mm, the clip is 2.4 mm thick for spring, and it prints upright.
A sleeve is only useful if it grips, and the AirPods Pro 2 case is slightly different from the first generation and from the Pro 3. In SpeakCAD you name the case and the strap width, preview the sleeve free in the browser, refine the clip tension in the chat, then download the STL for PETG.
Design a snap-on sleeve for an AirPods Pro 2 case with an inner pocket of 61.2 x 45.8 x 22.3 mm and 32 mm tall walls, a 12 mm bottom opening for USB-C, a 2.4 mm thick spring belt clip 45 mm long on the back, a 6 mm carabiner hole on top and 1.6 mm walls.