Enclosures & cases

AirTag wallet card holder slim credit card size

A credit-card footprint (85.6 x 54 mm) card that holds an Apple AirTag (31.9 mm diameter, 8 mm thick) in a wallet card slot so the wallet can be found in the Find My app. The AirTag sits in a 32.2 mm pocket in the centre and the two halves snap together around it with a 0.15 mm lip, leaving the card 9 mm thick at the bump and 1.2 mm at the edges so it still slides in beside real cards. Speaker holes are optional and both halves print flat.

An AirTag card downloaded from a general site is often too thick or cracks at the snap. In SpeakCAD you describe your wallet slot and whether you want a speaker opening, preview the card free in the browser, refine the snap in the chat, then download the STL and print it in PETG.

Get it nowGenerate and preview for free, in your browser. A download costs 2 credits.

Create a two-part 85.6 x 54 mm card with a 32.2 mm diameter, 8.3 mm deep central pocket for an AirTag, 1.2 mm thick edges, a 9 mm thick centre bump with 3 mm blend radii, a snap-fit lip with 0.15 mm clearance and six 1.5 mm speaker holes.

Change any number to match what you measured. The AI keeps the rest of the design consistent, and small follow-up edits after a download are free.

More enclosures & cases

Kia EV6 key fob cover with lanyard loopA protective sleeve for the Kia EV6, Niro EV and Hyundai Ioniq 5 smart key, which shares the same 5-button fob body.Enclosure for a relay module with terminal accessA protective housing for a one- or two-channel relay module that hides live terminals while leaving the screw terminals reachable through a slot and the cont…Handheld control box for four push buttonsA palm-sized housing for four 12 mm momentary push buttons, useful as a shortcut pad or a machine pendant.AirTag dog collar holder for 20 mm collarsA screw-closed AirTag holder that slides onto a 20 mm dog collar and sits flat against the neck, so the tag does not dangle, jingle or snag in bushes.Raspberry Pi 5 case with active cooler cutoutA two-part snap-fit case sized for the Raspberry Pi 5, whose board measures 85 x 56 mm with M2.5 mounting holes on a 58 x 49 mm pattern.Adafruit Feather case for a FeatherWing stackAn enclosure built around the Adafruit Feather form factor: 50.8 x 22.8 mm boards with 2.5 mm mounting holes on a 45.72 x 17.78 mm pattern.

Make your airtag wallet card holder slim credit card size now

Nothing to install and no CAD skills needed. Describe it, watch it render, download the STL or 3MF and print it tonight.

Get it nowBrowse the library
Looking for a ready-made version? Check the marketplace, where makers sell finished, rated models for credits.