1
The prompt on this page opens in SpeakCAD already filled in — after sign-in too. The model renders in your browser. Preview is free.Enclosures & cases
Sonoff MINIR4M junction-box insert
This is not a fixed STL. SpeakCAD generates the sonoff minir4m junction-box insert to your millimetres, you adjust it in the chat, then you download and print it.2
Change any millimetre in the chat: wall thickness, hole size, the thing it clips onto. Iterations stay in the tab until it matches what you own.Adjust
3Print
Download a watertight STL or 3MF for 2 credits, drop it in your slicer, and print it. Small fit fixes re-download free.Get it nowThe example prompt comes with you, even through sign-in. Preview is free; a download costs 2 credits.
What a sonoff minir4m junction-box insert is
An insert that holds a MINIR4M in a 80 × 80 mm junction box with strain-relief slots. Print in PETG.
A floating Mini in a box is a short. Describe the box in SpeakCAD, preview the insert in the browser at no cost, then download the STL.
Example prompt
Design a MINIR4M insert for an 80×80 mm box, strain-relief slots, 1.6 mm PETG.
People also search
sonoff minir4m insert stlminir4m junction box 3d printsonoff mini box trayminir4m enclosure insert 3d model
Questions people ask about a sonoff minir4m junction-box insert
An insert that holds a MINIR4M in a 80 × 80 mm junction box with strain-relief slots. Print in PETG.
Click Get it now on this page: the example prompt is filled in for you after you sign in. The model renders in your browser — nothing to install — and previewing is free. Adjust any millimetre in the chat, then export a watertight STL or 3MF for 2 credits when you want to print.
Start from this working example and replace any number with what you measured: Design a MINIR4M insert for an 80×80 mm box, strain-relief slots, 1.6 mm PETG.
A floating Mini in a box is a short. In SpeakCAD you generate and preview for free, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More enclosures & cases
Backbone One 2 iPhone travel caseA two-part case that holds a Backbone One 2 with an iPhone 17 still clipped in, 180 × 90 × 25 mm.Nintendo Switch 2 dock dust coverA cover that sits on a Switch 2 dock (about 170 × 80 × 60 mm) when the console is undocked so dust is not in the USB-C slot.Safety cover for an open-frame 12 V power supplyA vented cover that fits over an open-frame 12 V 5 A switching power supply so the mains terminals are no longer exposed on a bench or inside a project.Apple Watch Ultra charger puck travel case with cable wrapA pocket-size case for the Apple Watch magnetic fast charger used by the Ultra and Series 10, holding the puck (27.9 mm diameter, about 6 mm high) in a 28.4…Garmin Edge 1040 silicone-style bumper caseA flexible bumper printed in TPU that wraps the Garmin Edge 1040 and 1040 Solar (59.3 x 117.6 x 20 mm) to protect the corners in a crash and the screen edge…Heltec LoRa V3 Meshtastic case with SMA antenna holeA rugged node case for the Heltec WiFi LoRa 32 V3, the board most Meshtastic beginners start with.