1
The prompt on this page opens in SpeakCAD already filled in — after sign-in too. The model renders in your browser. Preview is free.Enclosures & cases
Apple Watch Series 11 travel charger case
This is not a fixed STL. SpeakCAD generates the apple watch series 11 travel charger case to your millimetres, you adjust it in the chat, then you download and print it.2
Change any millimetre in the chat: wall thickness, hole size, the thing it clips onto. Iterations stay in the tab until it matches what you own.Adjust
3Print
Download a watertight STL or 3MF for 2 credits, drop it in your slicer, and print it. Small fit fixes re-download free.Get it nowThe example prompt comes with you, even through sign-in. Preview is free; a download costs 2 credits.
What a apple watch series 11 travel charger case is
A two-part clamshell that holds an Apple Watch Series 11 (about 46 mm case) on its magnetic charger plus a 1 m USB-C cable coiled in a 70 mm spiral. The watch nest is 48 mm with 0.4 mm clearance around the Digital Crown, the puck sits in a 28 mm recess 6 mm deep, and a 4 mm latch keeps the lid shut in a bag. Print both halves flat in PLA with a 1.2 mm wall and a 0.2 mm lid gap.
A case cut for Series 10 leaves the Series 11 crown scraping. In SpeakCAD you type the band you travel with, preview the clamshell in the browser without paying, then download the STL.
Example prompt
Model an Apple Watch Series 11 travel case 90×70×22 mm, two-part clamshell, 48 mm watch nest with 0.4 mm clearance, 28 mm puck recess 6 mm deep, 70 mm cable spiral, 4 mm latch and 1.2 mm walls.
People also search
apple watch series 11 charger case stlwatch series 11 travel case 3d printapple watch charger travel boxseries 11 puck case 3d model
Questions people ask about a apple watch series 11 travel charger case
A two-part clamshell that holds an Apple Watch Series 11 (about 46 mm case) on its magnetic charger plus a 1 m USB-C cable coiled in a 70 mm spiral. The watch nest is 48 mm with 0.4 mm clearance around the Digital Crown, the puck sits in a 28 mm recess 6 mm deep, and a 4 mm latch keeps the lid shut in a bag. Print both halves flat in PLA with a 1.2 mm wall and a 0.2 mm lid gap.
Click Get it now on this page: the example prompt is filled in for you after you sign in. The model renders in your browser — nothing to install — and previewing is free. Adjust any millimetre in the chat, then export a watertight STL or 3MF for 2 credits when you want to print.
Start from this working example and replace any number with what you measured: Model an Apple Watch Series 11 travel case 90×70×22 mm, two-part clamshell, 48 mm watch nest with 0.4 mm clearance, 28 mm puck recess 6 mm deep, 70 mm cable spiral, 4 mm latch and 1.2 mm walls.
A case cut for Series 10 leaves the Series 11 crown scraping. In SpeakCAD you generate and preview for free, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More enclosures & cases
MeanWell LRS-350 terminal cover with strain reliefA snap-on guard for the exposed screw terminals on a MeanWell LRS-350 series power supply, whose chassis is 215 x 115 x 30 mm with the terminal block at one…Home Assistant Yellow DIN-rail clipA clip that hangs a Home Assistant Yellow on a 35 mm DIN rail with 0.3 mm snap.Project box for an ESP32 dev board with USB openingA compact housing for a 30-pin ESP32 DevKit board that leaves the USB connector exposed for programming and power while covering the pins.Bezel case for a 0.96 inch OLED moduleA small front bezel and back cover for the popular 0.96 inch I2C OLED module, turning a bare board into a neat readout you can screw to a panel or stand on a…AirTag dog collar holder for 20 mm collarsA screw-closed AirTag holder that slides onto a 20 mm dog collar and sits flat against the neck, so the tag does not dangle, jingle or snag in bushes.Arduino Uno R4 WiFi case with LED matrix windowA protective box for the Arduino Uno R4 WiFi that keeps the 12 x 8 LED matrix visible.