1
Enclosures & cases
Shimano STEPS SC-E5000 display protective cover
The Shimano STEPS SC-E5000 display sits proud of the handlebar and is easily scratched when an e-bike is parked in a crowded rack or leaned against a wall. This cover is a shallow shell that slides over the display from the front with 2 mm walls, 0.4 mm clearance, a 3 mm cutout at the back for the cable and a friction lip so it stays on while the bike is parked but pulls off in a second. The pocket is sized to your measured display, around 60 x 45 x 15 mm, and it prints open-face down in PETG or TPU without supports. Open the ready-made model free, resize it on your phone or computer, then download a print-ready STL, 3MF or G-code sliced for your printer, free.Opening the ready-made model and downloading it as STL or 3MF are free, no card; AI changes use credits, from Maker at $7.99 a month.No printer? We print this part and ship it to your door. See its priceUpdated
2
Adjust
Change its numbers in the viewer for free, or ask the AI in the chat: wall thickness, hole size, the thing it clips onto. AI changes use 2 credits per request (1 for a quick edit, 3 for a redesign), paid with a plan from Maker at $7.99 a month.3Print
Download a watertight STL or 3MF free, with your numbers and hand edits, or G-code sliced for your printer at the same price. After an AI change the download is included in every plan (4 credits without one).
Dimensions of the ready-made model (editable)
| Parameter | Value |
|---|---|
| device length (slide direction) | 60 mm |
| device width | 45 mm |
| device thickness | 15 mm |
| clearance around device | 0.4 mm |
| wall thickness | 2 mm |
| outer corner rounding | 1.5 mm |
| inward friction lip depth (protrusion) | 0.6 mm |
| length of lip band near open edge | 6 mm |
| cable cutout width | 3 mm |
| fraction of wall height the slot covers | 0.7 |
Example prompt
Model a slide-on protective shell for a 60 x 45 x 15 mm handlebar display with 2 mm walls, 0.4 mm clearance, a 3 mm wide cable cutout on the rear face, a 0.6 mm inward friction lip along the open edge and 1.5 mm rounded corners.
Fit notes
E-bike displays change shape between SC-E5000, SC-E6100 and SC-E7000, so downloaded covers are hit and miss. Type your display's outer dimensions into SpeakCAD, preview the shell in the browser, refine the lip in the chat, then download the STL.
Questions people ask about a Shimano STEPS SC-E5000 display protective cover
The Shimano STEPS SC-E5000 display sits proud of the handlebar and is easily scratched when an e-bike is parked in a crowded rack or leaned against a wall. This cover is a shallow shell that slides over the display from the front with 2 mm walls, 0.4 mm clearance, a 3 mm cutout at the back for the cable and a friction lip so it stays on while the bike is parked but pulls off in a second. The pocket is sized to your measured display, around 60 x 45 x 15 mm, and it prints open-face down in PETG or TPU without supports.
Click Open it free on this page and create a free account (no card): the ready-made model opens in your browser, on your phone or computer, nothing to install. Change its numbers in the viewer for free and download a watertight STL or 3MF free, or G-code sliced for your printer at the same price. An AI change in the chat uses 2 credits per request (3 for a redesign), and the download after it is included in every plan (4 credits without one). Start with Maker: 50 credits a month for $7.99, cancel anytime.
On this page: open the ready-made model free in a SpeakCAD account (no card), change any dimension in the viewer, then download the STL or 3MF free, or G-code sliced for your printer at the same price.
A shared STL is modelled for someone else's measurements. Here you open the ready-made model free, change it to your measurements in the viewer, then download a file sized for the part you actually own, free as STL or 3MF.
Yes. SpeakCAD slices the part on its servers with OrcaSlicer and your printer's official profile (380+ printers, including Bambu Lab, Prusa, Creality and Elegoo), and you download the G-code (a sliced .gcode.3mf for Bambu Lab printers). G-code sliced for your printer costs the same as the STL: included in every plan, free for a part you shaped by hand, 4 credits without a plan for a part with AI work in it. Pick your printer on the printers page to see its profile.
No. SpeakCAD runs in the browser on your phone or computer: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL, 3MF or sliced G-code.
Print it your way
More enclosures & cases
BMW G20 3 Series key fob cover caseReady-made, opens free. A two-part snap shell for the BMW G20, G30 and G05 key fob (2019 onward, the fob with the chrome band), protecting the glossy plastic from keys and coins.Home Assistant Yellow DIN-rail clipReady-made, opens free. A clip that hangs a Home Assistant Yellow on a 35 mm DIN rail with 0.3 mm snap.Screw-lid enclosure for an 80 x 50 mm PCBReady-made, opens free. A general purpose electronics box for a custom 80 x 50 mm circuit board, with four corner posts, a screw-down lid and blank walls you can specify openings in…Handheld control box for four push buttonsReady-made, opens free. A palm-sized housing for four 12 mm momentary push buttons, useful as a shortcut pad or a machine pendant.AirPods Pro 2 case belt clip with carabiner holeReady-made, opens free. A snap-on sleeve for the AirPods Pro 2 charging case (60.6 x 45.2 x 21.7 mm) with a spring belt clip on the back and a 6 mm carabiner hole on top, so the ear…Wemos D1 Mini enclosure with DHT22 sensor slotReady-made, opens free. A wall-mountable box for a Wemos D1 Mini (34.2 x 25.6 mm) with a dedicated slot for a DHT22 temperature and humidity sensor.