Handheld control box for four push buttons
A palm-sized housing for four 12 mm momentary push buttons, useful as a shortcut pad or a machine pendant. The top face has four 12.2 mm holes in a 2 x 2 grid at 22 mm spacing in a 2.5 mm panel so the button nuts bite properly, and the body is 70 x 70 x 30 mm with 2 mm walls and rounded edges. A 7 mm cable exit with a strain relief boss sits on one end, and the bottom plate screws on with four M3 screws.
Switch diameters, spacing and cable size are all yours to set, so SpeakCAD gives you a panel where every hole is right on the first print. Preview it free in the browser, then add a toggle switch, an LED hole or a belt clip with a follow-up request.
Create a handheld control box 70x70x30 mm with 2 mm walls and 4 mm rounded vertical edges. Top panel 2.5 mm thick with four 12.2 mm holes in a 2x2 grid at 22 mm spacing. 7 mm cable hole with strain relief boss. Bottom plate with four M3 screws.