1
Enclosures & cases
ESP32-S3 SuperMini case with USB-C
A snap case for an ESP32-S3 SuperMini with a USB-C window, two GPIO slots and 2 mm vents. Print in PLA. Open the ready-made model free, resize it on your phone or computer, then download a print-ready STL, 3MF or G-code sliced for your printer, free.Opening the ready-made model and downloading it as STL or 3MF are free, no card; AI changes use credits, from Maker at $7.99 a month.No printer? We print this part and ship it to your door. See its priceUpdated
2
Adjust
Change its numbers in the viewer for free, or ask the AI in the chat: wall thickness, hole size, the thing it clips onto. AI changes use 2 credits per request (1 for a quick edit, 3 for a redesign), paid with a plan from Maker at $7.99 a month, where the first 3 small changes are free.3Print
Download a watertight STL or 3MF free, with your numbers and hand edits, or G-code sliced for your printer at the same price. After an AI change the download is included in every plan (4 credits without one).
Dimensions of the ready-made model (editable)
| Parameter | Value |
|---|---|
| Wall thickness | 1.2 mm |
| Board length | 23 mm |
| Board width | 18 mm |
| Board + header thickness | 4 mm |
| Clearance around board | 0.3 mm |
| Clearance for lid skirt | 0.3 mm |
| USB-C window width | 10 mm |
| USB-C window height | 4 mm |
| GPIO slot width | 16 mm |
| GPIO slot height | 3 mm |
| Vent hole diameter | 2 mm |
Example prompt
Model an S3 SuperMini case, USB-C window, two GPIO slots, 2 mm vents, snap lid, 1.2 mm walls.
Fit notes
A bare SuperMini on a desk is a short. Describe the headers in SpeakCAD, preview the case in the browser, then download the STL.
Questions people ask about an ESP32-S3 SuperMini case with USB-C
A snap case for an ESP32-S3 SuperMini with a USB-C window, two GPIO slots and 2 mm vents. Print in PLA.
Click Open it free on this page and create a free account (no card): the ready-made model opens in your browser, on your phone or computer, nothing to install. Change its numbers in the viewer for free and download a watertight STL or 3MF free, or G-code sliced for your printer at the same price. An AI change in the chat uses 2 credits per request (3 for a redesign), and the download after it is included in every plan (4 credits without one). Start with Maker: 50 credits a month for $7.99, cancel anytime.
On this page: open the ready-made model free in a SpeakCAD account (no card), change any dimension in the viewer, then download the STL or 3MF free, or G-code sliced for your printer at the same price.
A shared STL is modelled for someone else's measurements. Here you open the ready-made model free, change it to your measurements in the viewer, then download a file sized for the part you actually own, free as STL or 3MF.
Yes. SpeakCAD slices the part on its servers with OrcaSlicer and your printer's official profile (380+ printers, including Bambu Lab, Prusa, Creality and Elegoo), and you download the G-code (a sliced .gcode.3mf for Bambu Lab printers). G-code sliced for your printer costs the same as the STL: included in every plan, free for a part you shaped by hand, 4 credits without a plan for a part with AI work in it. Pick your printer on the printers page to see its profile.
No. SpeakCAD runs in the browser on your phone or computer: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL, 3MF or sliced G-code.
Print it your way
More enclosures & cases
SONOFF ZBDongle-E protective case with USB extension slotReady-made, opens free. A wraparound sleeve for the SONOFF ZBDongle-E Zigbee coordinator, which measures about 65 x 23 x 12 mm including its USB-A plug and carries an SMA antenna co…Backbone One 2 iPhone travel caseReady-made, opens free. A two-part case that holds a Backbone One 2 with an iPhone 17 still clipped in, 180 × 90 × 25 mm.Vented case for a Raspberry Pi 4Ready-made, opens free. A two-part shell for the Raspberry Pi 4 that protects the board while keeping it cool, with cut-outs for USB, Ethernet, HDMI, audio, USB-C power and the micr…Junction box with gasket groove for outdoor useReady-made, opens free. A small outdoor box for joining low-voltage cables, sensors or LED drivers where rain must stay out.AirTag wallet card holder slim credit card sizeReady-made, opens free. A credit-card footprint (85.6 x 54 mm) card that holds an Apple AirTag (31.9 mm diameter, 8 mm thick) in a wallet card slot so the wallet can be found in the…Raspberry Pi 5 case with active cooler cutoutReady-made, opens free. A two-part snap-fit case sized for the Raspberry Pi 5, whose board measures 85 x 56 mm with M2.5 mounting holes on a 58 x 49 mm pattern.