1
The prompt on this page opens in SpeakCAD already filled in — after sign-in too. The model renders in your browser. Preview is free.Enclosures & cases
Home Assistant Yellow DIN-rail clip
This is not a fixed STL. SpeakCAD generates the home assistant yellow din-rail clip to your millimetres, you adjust it in the chat, then you download and print it.2
Change any millimetre in the chat: wall thickness, hole size, the thing it clips onto. Iterations stay in the tab until it matches what you own.Adjust
3Print
Download a watertight STL or 3MF for 2 credits, drop it in your slicer, and print it. Small fit fixes re-download free.Get it nowThe example prompt comes with you, even through sign-in. Preview is free; a download costs 2 credits.
What a home assistant yellow din-rail clip is
A clip that hangs a Home Assistant Yellow on a 35 mm DIN rail with 0.3 mm snap. Print in PETG.
The Yellow on a shelf is a dust magnet. In SpeakCAD you confirm Yellow vs Green, preview the clip in the browser without paying, then download the STL.
Example prompt
Model a HA Yellow DIN clip, 35 mm rail, 0.3 mm snap, 2 mm PETG.
People also search
home assistant yellow din stlha yellow din rail 3d printhome assistant yellow clipha yellow rack mount 3d model
Questions people ask about a home assistant yellow din-rail clip
A clip that hangs a Home Assistant Yellow on a 35 mm DIN rail with 0.3 mm snap. Print in PETG.
Click Get it now on this page: the example prompt is filled in for you after you sign in. The model renders in your browser — nothing to install — and previewing is free. Adjust any millimetre in the chat, then export a watertight STL or 3MF for 2 credits when you want to print.
Start from this working example and replace any number with what you measured: Model a HA Yellow DIN clip, 35 mm rail, 0.3 mm snap, 2 mm PETG.
The Yellow on a shelf is a dust magnet. In SpeakCAD you generate and preview for free, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More enclosures & cases
Screw-lid enclosure for an 80 x 50 mm PCBA general purpose electronics box for a custom 80 x 50 mm circuit board, with four corner posts, a screw-down lid and blank walls you can specify openings in…Handheld control box for four push buttonsA palm-sized housing for four 12 mm momentary push buttons, useful as a shortcut pad or a machine pendant.AirPods Pro 2 case belt clip with carabiner holeA snap-on sleeve for the AirPods Pro 2 charging case (60.6 x 45.2 x 21.7 mm) with a spring belt clip on the back and a 6 mm carabiner hole on top, so the ear…ESP32-C3 SuperMini case with BME280 sensor ventsA tiny room sensor enclosure for an ESP32-C3 SuperMini board (22.5 x 18 mm) paired with a BME280 breakout (about 15 x 12 mm).SONOFF ZBDongle-E protective case with USB extension slotA wraparound sleeve for the SONOFF ZBDongle-E Zigbee coordinator, which measures about 65 x 23 x 12 mm including its USB-A plug and carries an SMA antenna co…Backbone One 2 iPhone travel caseA two-part case that holds a Backbone One 2 with an iPhone 17 still clipped in, 180 × 90 × 25 mm.