1
Enclosures & cases
Sim racing button box with 12 buttons
This is not a fixed STL. SpeakCAD generates the sim racing button box with 12 buttons to your millimetres, you adjust it in the chat, then you download and print it.Building the 3D preview…
2
Adjust
Click a part and change its numbers in the viewer, or ask the AI in the chat: wall thickness, hole size, the thing it clips onto. AI changes use plan credits.3Print
Download a watertight STL or 3MF with a Maker or Pro plan, drop it in your slicer, and print it. Small fit fixes re-download free.
Get it nowOpening the ready-made model is free. A plan covers AI changes and the download.
Example prompt
Model a sim racing button box, 200×110 mm angled face, twelve 19 mm holes 28 mm apart, Pro Micro standoffs, 9×4 mm USB hole, four M4 base holes.
What a sim racing button box with 12 buttons is
A button box enclosure for sim racing with twelve 19 mm momentary push buttons in a 3 × 4 grid, 28 mm apart, on an angled 200 × 110 mm face. Inside there is room for an Arduino Pro Micro (33 × 18 mm) on standoffs, a 9 × 4 mm USB opening at the back and four M4 holes in the base for a rig or desk. Print the face down in PETG, 2.5 mm walls.
Larger 22 mm arcade buttons need wider spacing, so change the hole size in the chat. Open the box in SpeakCAD at no cost, edit any millimetre in the viewer or the chat, then download the STL.
People also search
sim racing button box stlbutton box enclosure 3d printdiy button box casesim racing button box 3d model
Questions people ask about a sim racing button box with 12 buttons
A button box enclosure for sim racing with twelve 19 mm momentary push buttons in a 3 × 4 grid, 28 mm apart, on an angled 200 × 110 mm face. Inside there is room for an Arduino Pro Micro (33 × 18 mm) on standoffs, a 9 × 4 mm USB opening at the back and four M4 holes in the base for a rig or desk. Print the face down in PETG, 2.5 mm walls.
Click Get it now on this page and sign in: you can open the ready-made model for free, and the example prompt is filled in if you want the AI to redesign it. The model renders in your browser, nothing to install. Change any millimetre in the viewer or the chat (AI changes use plan credits), then export a watertight STL or 3MF with a Maker or Pro plan when you want to print.
Start from this working example and replace any number with what you measured: Model a sim racing button box, 200×110 mm angled face, twelve 19 mm holes 28 mm apart, Pro Micro standoffs, 9×4 mm USB hole, four M4 base holes.
Larger 22 mm arcade buttons need wider spacing, so change the hole size in the chat. In SpeakCAD you open the ready-made model for free, change it to your measurements, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More enclosures & cases
BMW G20 3 Series key fob cover caseA two-part snap shell for the BMW G20, G30 and G05 key fob (2019 onward, the fob with the chrome band), protecting the glossy plastic from keys and coins.ESP32-WROOM 38-pin DevKit V1 case with pin accessA case for the 38-pin ESP32-WROOM DevKit V1 (about 55 × 28 mm, 25.4 mm between pin rows).SH1106 1.3 inch OLED caseA front bezel and back shell for a 1.3 inch SH1106 I2C OLED module (about 35.5 × 33.5 mm).PCA9685 16-channel servo driver caseA case for the PCA9685 16-channel servo driver (62.5 × 25.4 mm).Snap-lid enclosure for an Arduino UnoA protective box for an Arduino Uno with openings for the USB-B port and barrel jack, and a lid that clicks on without screws.AirTag dog collar holder for 20 mm collarsA screw-closed AirTag holder that slides onto a 20 mm dog collar and sits flat against the neck, so the tag does not dangle, jingle or snag in bushes.