1
The prompt on this page opens in SpeakCAD already filled in — after sign-in too. The model renders in your browser. Preview is free.Enclosures & cases
Raspberry Pi 5 Hailo HAT case
This is not a fixed STL. SpeakCAD generates the raspberry pi 5 hailo hat case to your millimetres, you adjust it in the chat, then you download and print it.2
Change any millimetre in the chat: wall thickness, hole size, the thing it clips onto. Iterations stay in the tab until it matches what you own.Adjust
3Print
Download a watertight STL or 3MF for 2 credits, drop it in your slicer, and print it. Small fit fixes re-download free.Get it nowThe example prompt comes with you, even through sign-in. Preview is free; a download costs 2 credits.
What a raspberry pi 5 hailo hat case is
A case that clears a Pi 5 with the Hailo AI HAT, 30 mm extra height, GPIO slot and 40 mm fan vents. Print in PLA.
A stock Pi 5 case hits the HAT. In SpeakCAD you confirm active cooler plus HAT, preview the case in the browser for free, then download the STL.
Example prompt
Create a Pi 5 Hailo HAT case, +30 mm height, GPIO slot, 40 mm fan vents, snap lid, 1.6 mm walls.
People also search
pi 5 hailo case stlraspberry pi 5 ai hat case 3d printpi5 hailo enclosurehailo hat pi5 box 3d model
Questions people ask about a raspberry pi 5 hailo hat case
A case that clears a Pi 5 with the Hailo AI HAT, 30 mm extra height, GPIO slot and 40 mm fan vents. Print in PLA.
Click Get it now on this page: the example prompt is filled in for you after you sign in. The model renders in your browser — nothing to install — and previewing is free. Adjust any millimetre in the chat, then export a watertight STL or 3MF for 2 credits when you want to print.
Start from this working example and replace any number with what you measured: Create a Pi 5 Hailo HAT case, +30 mm height, GPIO slot, 40 mm fan vents, snap lid, 1.6 mm walls.
A stock Pi 5 case hits the HAT. In SpeakCAD you generate and preview for free, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More enclosures & cases
M5Stack Atom Lite housing with Grove port cutoutAn outer housing that lets an M5Stack Atom Lite (24 x 24 x 10 mm) be screwed to a wall or DIN box while its Grove connector stays accessible.ESP32-S3 SuperMini case with USB-CA snap case for an ESP32-S3 SuperMini with a USB-C window, two GPIO slots and 2 mm vents.Snap-lid enclosure for an Arduino UnoA protective box for an Arduino Uno with openings for the USB-B port and barrel jack, and a lid that clicks on without screws.Case for an LM2596 buck converter moduleA tidy shell for the common 43 x 21 mm LM2596 step-down module, covering the exposed inductor and trimmer while leaving the input and output terminals reacha…AirTag luggage tag holder with screw-closed caseA luggage tag that hides an Apple AirTag (31.9 mm diameter, 8 mm thick) inside a screw-closed case so it cannot be prised out in transit, with a loop for a c…Raspberry Pi Zero 2 W slim snap-fit caseA minimal shell for the Raspberry Pi Zero 2 W, which measures 65 x 30 mm with four M2.5 holes on a 58 x 23 mm pattern.