1
Enclosures & cases
Waveshare RP2040-Zero case
This is not a fixed STL. SpeakCAD generates the waveshare rp2040-zero case to your millimetres, you adjust it in the chat, then you download and print it.Building the 3D preview…
2
Adjust
Click a part and change its numbers in the viewer, or ask the AI in the chat: wall thickness, hole size, the thing it clips onto. AI changes use plan credits.3Print
Download a watertight STL or 3MF with a Maker or Pro plan, drop it in your slicer, and print it. Small fit fixes re-download free.
Get it nowOpening the ready-made model is free. A plan covers AI changes and the download.
Example prompt
Design an RP2040-Zero case, 18.6×24.1×5.5 mm cavity, 9.5×3.8 mm USB-C slot, 1.5 mm button holes, 3 mm LED window, 2×16 mm wire slots.
What a waveshare rp2040-zero case is
A tiny snap case for a Waveshare RP2040-Zero (18 × 23.5 mm). The cavity is 18.6 × 24.1 × 5.5 mm with a 9.5 × 3.8 mm USB-C opening, 1.5 mm holes over BOOT and RESET, a 3 mm window over the WS2812 LED and a 2 × 16 mm slot on each long side for wires. Walls are 1.2 mm. Print both halves flat in PETG.
The ESP32-S3-Zero shares the outline but its antenna end wants no plastic, and the Pico is 21 × 51 mm. Open the ready-made model in SpeakCAD for free, change any millimetre in the viewer or the chat, then download the STL.
People also search
rp2040-zero case stlwaveshare rp2040 zero enclosurerp2040 zero case 3d printrp2040-zero box 3d model
Questions people ask about a waveshare rp2040-zero case
A tiny snap case for a Waveshare RP2040-Zero (18 × 23.5 mm). The cavity is 18.6 × 24.1 × 5.5 mm with a 9.5 × 3.8 mm USB-C opening, 1.5 mm holes over BOOT and RESET, a 3 mm window over the WS2812 LED and a 2 × 16 mm slot on each long side for wires. Walls are 1.2 mm. Print both halves flat in PETG.
Click Get it now on this page and sign in: you can open the ready-made model for free, and the example prompt is filled in if you want the AI to redesign it. The model renders in your browser, nothing to install. Change any millimetre in the viewer or the chat (AI changes use plan credits), then export a watertight STL or 3MF with a Maker or Pro plan when you want to print.
Start from this working example and replace any number with what you measured: Design an RP2040-Zero case, 18.6×24.1×5.5 mm cavity, 9.5×3.8 mm USB-C slot, 1.5 mm button holes, 3 mm LED window, 2×16 mm wire slots.
The ESP32-S3-Zero shares the outline but its antenna end wants no plastic, and the Pico is 21 × 51 mm. In SpeakCAD you open the ready-made model for free, change it to your measurements, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More enclosures & cases
Google Coral USB Accelerator holderA vented holder for a Coral USB Accelerator (65 × 30 × 8 mm) running Frigate object detection, which gets hot under load.AirTag wallet card holder slim credit card sizeA credit-card footprint (85.6 x 54 mm) card that holds an Apple AirTag (31.9 mm diameter, 8 mm thick) in a wallet card slot so the wallet can be found in the…Flipper Zero hard shell case with GPIO coverA bumper-style protective shell for the Flipper Zero, whose body is 100 x 40 x 25 mm.Matter Thread border-router case for nRFA vented case for an nRF52840 Thread border-router board with SMA and USB-C cutouts.Raspberry Pi CM5 IO Board caseA case for the Raspberry Pi Compute Module 5 IO Board (160 × 90 mm) with a CM5 and cooler fitted.2S BMS and 18650 pack holderA holder for two 18650 cells in series (each 18 × 65 mm) with a 2S BMS board (about 46 × 20 mm) on the side.