1
The prompt on this page opens in SpeakCAD already filled in — after sign-in too. The model renders in your browser. Preview is free.Enclosures & cases
Backbone One 2 iPhone travel case
This is not a fixed STL. SpeakCAD generates the backbone one 2 iphone travel case to your millimetres, you adjust it in the chat, then you download and print it.2
Change any millimetre in the chat: wall thickness, hole size, the thing it clips onto. Iterations stay in the tab until it matches what you own.Adjust
3Print
Download a watertight STL or 3MF for 2 credits, drop it in your slicer, and print it. Small fit fixes re-download free.Get it nowThe example prompt comes with you, even through sign-in. Preview is free; a download costs 2 credits.
What a backbone one 2 iphone travel case is
A two-part case that holds a Backbone One 2 with an iPhone 17 still clipped in, 180 × 90 × 25 mm. Print in TPU.
The Backbone in a pouch scratches the phone. In SpeakCAD you name the phone, preview the case in the browser without paying, then download the STL.
Example prompt
Model a Backbone One 2 travel case 180×90×25 mm, two-part TPU, iPhone 17 clearance.
People also search
backbone one 2 case stlbackbone iphone 17 case 3d printbackbone one 2 travelbackbone controller case 3d model
Questions people ask about a backbone one 2 iphone travel case
A two-part case that holds a Backbone One 2 with an iPhone 17 still clipped in, 180 × 90 × 25 mm. Print in TPU.
Click Get it now on this page: the example prompt is filled in for you after you sign in. The model renders in your browser — nothing to install — and previewing is free. Adjust any millimetre in the chat, then export a watertight STL or 3MF for 2 credits when you want to print.
Start from this working example and replace any number with what you measured: Model a Backbone One 2 travel case 180×90×25 mm, two-part TPU, iPhone 17 clearance.
The Backbone in a pouch scratches the phone. In SpeakCAD you generate and preview for free, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More enclosures & cases
Heltec LoRa V3 Meshtastic case with SMA antenna holeA rugged node case for the Heltec WiFi LoRa 32 V3, the board most Meshtastic beginners start with.BMW G20 3 Series key fob cover caseA two-part snap shell for the BMW G20, G30 and G05 key fob (2019 onward, the fob with the chrome band), protecting the glossy plastic from keys and coins.Shelly 2PM Gen3 DIN-rail adapterAn adapter that snaps a Shelly 2PM Gen3 onto a 35 mm DIN rail with 0.3 mm clearance.Screw-lid enclosure for an 80 x 50 mm PCBA general purpose electronics box for a custom 80 x 50 mm circuit board, with four corner posts, a screw-down lid and blank walls you can specify openings in…Handheld control box for four push buttonsA palm-sized housing for four 12 mm momentary push buttons, useful as a shortcut pad or a machine pendant.AirPods Pro 2 case belt clip with carabiner holeA snap-on sleeve for the AirPods Pro 2 charging case (60.6 x 45.2 x 21.7 mm) with a spring belt clip on the back and a 6 mm carabiner hole on top, so the ear…