1
The prompt on this page opens in SpeakCAD already filled in — after sign-in too. The model renders in your browser. Preview is free.Garden & outdoor
Garmin Edge 1050 out-front mount 31.8 mm
This is not a fixed STL. SpeakCAD generates the garmin edge 1050 out-front mount 31.8 mm to your millimetres, you adjust it in the chat, then you download and print it.2
Change any millimetre in the chat: wall thickness, hole size, the thing it clips onto. Iterations stay in the tab until it matches what you own.Adjust
3Print
Download a watertight STL or 3MF for 2 credits, drop it in your slicer, and print it. Small fit fixes re-download free.Get it nowThe example prompt comes with you, even through sign-in. Preview is free; a download costs 2 credits.
What a garmin edge 1050 out-front mount 31.8 mm is
An out-front mount for an Edge 1050 on a 31.8 mm bar with the quarter-turn head and a 20 mm GoPro boss underneath. Print in PETG, M5 clamp.
A 1040 mount sits the 1050's wider body on the bar. In SpeakCAD you pick bar size, preview the mount in the browser for free, then download the STL.
Example prompt
Create an Edge 1050 out-front for 31.8 mm bars, quarter-turn head, 20 mm GoPro boss, M5 clamp, 2.4 mm PETG.
People also search
garmin edge 1050 mount stledge 1050 out front 3d printgarmin 1050 31.8 mountedge 1050 gopro mount 3d model
Questions people ask about a garmin edge 1050 out-front mount 31.8 mm
An out-front mount for an Edge 1050 on a 31.8 mm bar with the quarter-turn head and a 20 mm GoPro boss underneath. Print in PETG, M5 clamp.
Click Get it now on this page: the example prompt is filled in for you after you sign in. The model renders in your browser — nothing to install — and previewing is free. Adjust any millimetre in the chat, then export a watertight STL or 3MF for 2 credits when you want to print.
Start from this working example and replace any number with what you measured: Create an Edge 1050 out-front for 31.8 mm bars, quarter-turn head, 20 mm GoPro boss, M5 clamp, 2.4 mm PETG.
A 1040 mount sits the 1050's wider body on the bar. In SpeakCAD you generate and preview for free, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More garden & outdoor
Compost aerator tool headA compost heap breaks down faster when air gets into the middle, and this aerator head turns a broom handle into a plunging turner.Tent stake puller hook for MSR Groundhog stakesA palm-sized hook that slides under the notched head of an MSR Groundhog, Mini Groundhog or any Y-beam stake and pulls it out of packed ground without bendin…Cowboy Cruiser ST phone-pad riserA 15 mm riser under a Cowboy phone pad so a MagSafe case still sits flush on the stem.Kuat NV 2.0 ratchet-handle hookA hook that parks an NV 2.0 ratchet handle so it does not swing into the tailgate, 16 mm snap.Petzl Actik Core bike-helmet mountA mount that puts an Actik Core on a bike-helmet vent, 20 mm snap and the official 25 mm lamp plate.Garden tool handle clips for shed railRakes, hoes and spades lean in a corner until a clip system holds them upright by the handle.