1
The prompt on this page opens in SpeakCAD already filled in — after sign-in too. The model renders in your browser. Preview is free.Garden & outdoor
VanMoof S5 rear-fender mudflap
This is not a fixed STL. SpeakCAD generates the vanmoof s5 rear-fender mudflap to your millimetres, you adjust it in the chat, then you download and print it.2
Change any millimetre in the chat: wall thickness, hole size, the thing it clips onto. Iterations stay in the tab until it matches what you own.Adjust
3Print
Download a watertight STL or 3MF for 2 credits, drop it in your slicer, and print it. Small fit fixes re-download free.Get it nowThe example prompt comes with you, even through sign-in. Preview is free; a download costs 2 credits.
What a vanmoof s5 rear-fender mudflap is
A 120 × 80 mm mudflap that clips onto an S5 rear fender so the motor does not get a stripe. Two 4 mm snaps match the fender rib. Print in TPU.
The stock flap is short. In SpeakCAD you measure the rib, preview the flap in the browser without paying, then download the STL.
Example prompt
Model an S5 mudflap 120×80×2 mm with two 4 mm snaps, TPU.
People also search
vanmoof s5 mudflap stls5 rear fender flap 3d printvanmoof s5 splash guards5 mud flap 3d model
Questions people ask about a vanmoof s5 rear-fender mudflap
A 120 × 80 mm mudflap that clips onto an S5 rear fender so the motor does not get a stripe. Two 4 mm snaps match the fender rib. Print in TPU.
Click Get it now on this page: the example prompt is filled in for you after you sign in. The model renders in your browser — nothing to install — and previewing is free. Adjust any millimetre in the chat, then export a watertight STL or 3MF for 2 credits when you want to print.
Start from this working example and replace any number with what you measured: Model an S5 mudflap 120×80×2 mm with two 4 mm snaps, TPU.
The stock flap is short. In SpeakCAD you generate and preview for free, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More garden & outdoor
Drip irrigation tube stakeDrip lines wander out of pots unless pinned, and this stake holds 4 mm micro tubing right at the plant base.Writable plant label stakesWooden labels rot and rubber-banded tags fall off; a printed stake with a recessed writing panel lasts several seasons and takes a pencil or paint marker.Solar garden light ground stakeSolar path lights come with flimsy stakes that snap in dry soil or when a foot catches them, and once the stake is gone the light is useless.Bosch Kiox 300 display sun hoodA 40 mm hood that clips onto a Bosch Kiox 300 (about 60 × 45 mm) so the screen stays readable at noon.Rad Power RadRunner basket spacerA 20 mm spacer pair that lifts a RadRunner rear basket so a fat 4 inch tyre does not rub.MSR PocketRocket 2 110 g canister standA three-leg stand that widens a 110 g canister under a PocketRocket 2 so it does not tip a 1 L pot.