1
The prompt on this page opens in SpeakCAD already filled in — after sign-in too. The model renders in your browser. Preview is free.Garden & outdoor
Cowboy Cruiser ST phone-pad riser
This is not a fixed STL. SpeakCAD generates the cowboy cruiser st phone-pad riser to your millimetres, you adjust it in the chat, then you download and print it.2
Change any millimetre in the chat: wall thickness, hole size, the thing it clips onto. Iterations stay in the tab until it matches what you own.Adjust
3Print
Download a watertight STL or 3MF for 2 credits, drop it in your slicer, and print it. Small fit fixes re-download free.Get it nowThe example prompt comes with you, even through sign-in. Preview is free; a download costs 2 credits.
What a cowboy cruiser st phone-pad riser is
A 15 mm riser under a Cowboy phone pad so a MagSafe case still sits flush on the stem. The plate matches the official 4-hole pattern. Print in PETG.
A thick case floats off the pad. Describe the case in SpeakCAD, preview the riser in the browser at no cost, then download the STL.
Example prompt
Design a Cowboy phone-pad riser 15 mm with the official 4-hole pattern, 2 mm PETG.
People also search
cowboy cruiser phone riser stlcowboy st phone pad 3d printcowboy magsafe risercowboy phone mount spacer 3d model
Questions people ask about a cowboy cruiser st phone-pad riser
A 15 mm riser under a Cowboy phone pad so a MagSafe case still sits flush on the stem. The plate matches the official 4-hole pattern. Print in PETG.
Click Get it now on this page: the example prompt is filled in for you after you sign in. The model renders in your browser — nothing to install — and previewing is free. Adjust any millimetre in the chat, then export a watertight STL or 3MF for 2 credits when you want to print.
Start from this working example and replace any number with what you measured: Design a Cowboy phone-pad riser 15 mm with the official 4-hole pattern, 2 mm PETG.
A thick case floats off the pad. In SpeakCAD you generate and preview for free, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More garden & outdoor
Garden tool handle clips for shed railRakes, hoes and spades lean in a corner until a clip system holds them upright by the handle.Rain gauge with fence bracketKnowing how much rain fell overnight tells you whether to water, and a printed rain gauge costs less than a coffee.Tent guy line tensioner for 3 mm reflective cordA three-hole line tensioner for the 2 to 3 mm reflective guy cord used on MSR, Big Agnes, Nemo and Decathlon Quechua tents, replacing the sliders that snap i…Trek Rail Bosch charger holsterA garage holster that parks a Bosch 4A charger and the Rail's charge-port cap on a 4.5 mm hole pair.Hammerhead Karoo 3 out-front mountAn out-front for a Karoo 3 on 31.8 mm bars with the official 4-hole pattern and a 20 mm GoPro boss.Black Diamond Spot 400 helmet clipA clip that puts a Spot 400 on a vented helmet without the official kit, 18 mm vent snap and a 25 mm lamp saddle.