1
The prompt on this page opens in SpeakCAD already filled in — after sign-in too. The model renders in your browser. Preview is free.Garden & outdoor
Bosch Kiox 300 display sun hood
This is not a fixed STL. SpeakCAD generates the bosch kiox 300 display sun hood to your millimetres, you adjust it in the chat, then you download and print it.2
Change any millimetre in the chat: wall thickness, hole size, the thing it clips onto. Iterations stay in the tab until it matches what you own.Adjust
3Print
Download a watertight STL or 3MF for 2 credits, drop it in your slicer, and print it. Small fit fixes re-download free.Get it nowThe example prompt comes with you, even through sign-in. Preview is free; a download costs 2 credits.
What a bosch kiox 300 display sun hood is
A 40 mm hood that clips onto a Bosch Kiox 300 (about 60 × 45 mm) so the screen stays readable at noon. The snap is 2 mm TPU lips. Print in PETG or TPU.
The stock bezel washes out on a south climb. In SpeakCAD you confirm Kiox 300 vs 500, preview the hood in the browser at no cost, then download the STL.
Example prompt
Design a Kiox 300 sun hood 70×50×20 mm with 2 mm snap lips, 1.6 mm walls.
People also search
bosch kiox 300 hood stlkiox 300 sun shade 3d printbosch kiox display hoodkiox 300 visor 3d model
Questions people ask about a bosch kiox 300 display sun hood
A 40 mm hood that clips onto a Bosch Kiox 300 (about 60 × 45 mm) so the screen stays readable at noon. The snap is 2 mm TPU lips. Print in PETG or TPU.
Click Get it now on this page: the example prompt is filled in for you after you sign in. The model renders in your browser — nothing to install — and previewing is free. Adjust any millimetre in the chat, then export a watertight STL or 3MF for 2 credits when you want to print.
Start from this working example and replace any number with what you measured: Design a Kiox 300 sun hood 70×50×20 mm with 2 mm snap lips, 1.6 mm walls.
The stock bezel washes out on a south climb. In SpeakCAD you generate and preview for free, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More garden & outdoor
Jetboil fuel canister stabilizer stand for camping stoveA tripod foot that clips onto the base of a 100 g or 230 g isobutane canister so a Jetboil Flash, MiniMo or MSR PocketRocket does not tip on uneven ground.Brompton C Line front-carrier block coverA cover that keeps grit out of a C Line front-carrier block when the bag is off, 40 × 30 × 15 mm with a 2 mm snap.Apidura Expedition drybag roll clipA clip that keeps an Expedition drybag roll from unrolling, 40 mm jaws with a 2 mm TPU lip.Garmin inReach Mini 2 sternum mountA mount that puts an inReach Mini 2 on a 25 mm sternum strap with the antenna up, 28 mm well and a 2 mm webbing slot.Raised bed corner connectorTimber raised beds are quickest to build when the boards slot into corner connectors instead of being screwed at awkward angles.Compost aerator tool headA compost heap breaks down faster when air gets into the middle, and this aerator head turns a broom handle into a plunging turner.