1
Garden & outdoor
Jetboil fuel canister stabilizer stand for camping stove
A tripod foot that clips onto the base of a 100 g or 230 g isobutane canister so a Jetboil Flash, MiniMo or MSR PocketRocket does not tip on uneven ground. Three legs spread to a 160 mm footprint and hinge together with a 3 mm pin so the stand folds flat into the pot; the centre ring has a 3 mm lip that snaps into the canister's base rim, 0.3 mm oversize, with the 100 g size at about 90 mm and the 230 g at 110 mm. Print it in PETG or nylon; the stand sits well below the flame but should still not be PLA. Open the ready-made model free, resize it on your phone or computer, then download a print-ready STL, 3MF or G-code sliced for your printer, free.Opening the ready-made model and downloading it as STL or 3MF are free, no card; AI changes use credits, from Maker at $7.99 a month.No printer? We print this part and ship it to your door. See its priceUpdated
2
Adjust
Change its numbers in the viewer for free, or ask the AI in the chat: wall thickness, hole size, the thing it clips onto. AI changes use 2 credits per request (1 for a quick edit, 3 for a redesign), paid with a plan from Maker at $7.99 a month.3Print
Download a watertight STL or 3MF free, with your numbers and hand edits, or G-code sliced for your printer at the same price. After an AI change the download is included in every plan (4 credits without one).
Dimensions of the ready-made model (editable)
| Parameter | Value |
|---|---|
| inner diameter of ring | 112 mm |
| wall thickness | 3 mm |
| ring height | 6 mm |
| inward snap lip depth | 1 mm |
| lip height (from top) | 1.5 mm |
| leg length | 80 mm |
| leg width | 12 mm |
| leg thickness | 4 mm |
| pin diameter | 3 mm |
| hinge knuckle radius | 5 mm |
| length of each ring-side knuckle (along hinge axis) | 3 mm |
| print-in-place clearance gap | 0.4 mm |
| distance from leg tip to pad center | 6 mm |
Example prompt
Design a folding fuel canister stand with a centre ring 112 mm inner diameter, 6 mm tall and 3 mm thick with a 1 mm inward snap lip, three legs 80 mm long and 12 mm wide hinged on 3 mm pins, 4 mm leg thickness and rubber pad recesses at the feet.
Fit notes
Canister rims differ between Jetboil, MSR, Primus and Coleman brands, and the official stabilizer only fits one size. Measure your canister, tell SpeakCAD the rim diameter and leg length you want, preview the stand in the browser, refine the snap in the chat, then download the STL.
Questions people ask about a Jetboil fuel canister stabilizer stand for camping stove
A tripod foot that clips onto the base of a 100 g or 230 g isobutane canister so a Jetboil Flash, MiniMo or MSR PocketRocket does not tip on uneven ground. Three legs spread to a 160 mm footprint and hinge together with a 3 mm pin so the stand folds flat into the pot; the centre ring has a 3 mm lip that snaps into the canister's base rim, 0.3 mm oversize, with the 100 g size at about 90 mm and the 230 g at 110 mm. Print it in PETG or nylon; the stand sits well below the flame but should still not be PLA.
Click Open it free on this page and create a free account (no card): the ready-made model opens in your browser, on your phone or computer, nothing to install. Change its numbers in the viewer for free and download a watertight STL or 3MF free, or G-code sliced for your printer at the same price. An AI change in the chat uses 2 credits per request (3 for a redesign), and the download after it is included in every plan (4 credits without one). Start with Maker: 50 credits a month for $7.99, cancel anytime.
On this page: open the ready-made model free in a SpeakCAD account (no card), change any dimension in the viewer, then download the STL or 3MF free, or G-code sliced for your printer at the same price.
A shared STL is modelled for someone else's measurements. Here you open the ready-made model free, change it to your measurements in the viewer, then download a file sized for the part you actually own, free as STL or 3MF.
Yes. SpeakCAD slices the part on its servers with OrcaSlicer and your printer's official profile (380+ printers, including Bambu Lab, Prusa, Creality and Elegoo), and you download the G-code (a sliced .gcode.3mf for Bambu Lab printers). G-code sliced for your printer costs the same as the STL: included in every plan, free for a part you shaped by hand, 4 credits without a plan for a part with AI work in it. Pick your printer on the printers page to see its profile.
No. SpeakCAD runs in the browser on your phone or computer: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL, 3MF or sliced G-code.
Print it your way
More garden & outdoor
Writable plant label stakesReady-made, opens free. Wooden labels rot and rubber-banded tags fall off; a printed stake with a recessed writing panel lasts several seasons and takes a pencil or paint marker.Solar garden light ground stakeReady-made, opens free. Solar path lights come with flimsy stakes that snap in dry soil or when a foot catches them, and once the stake is gone the light is useless.Specialized Levo SL bottle-cage adapterReady-made, opens free. An adapter that moves a bottle cage 20 mm off a Levo SL downtube so a 750 ml bottle clears the motor.Rad Power RadRunner basket spacerReady-made, opens free. A 20 mm spacer pair that lifts a RadRunner rear basket so a fat 4 inch tyre does not rub.MSR PocketRocket 2 110 g canister standReady-made, opens free. A three-leg stand that widens a 110 g canister under a PocketRocket 2 so it does not tip a 1 L pot.Drip irrigation tube stakeReady-made, opens free. Drip lines wander out of pots unless pinned, and this stake holds 4 mm micro tubing right at the plant base.