1
Garden & outdoor
MSR PocketRocket 2 110 g canister stand
A three-leg stand that widens a 110 g canister under a PocketRocket 2 so it does not tip a 1 L pot. Print in PETG. Open the ready-made model free, resize it on your phone or computer, then download a print-ready STL, 3MF or G-code sliced for your printer, free.Opening the ready-made model and downloading it as STL or 3MF are free, no card; AI changes use credits, from Maker at $7.99 a month.No printer? We print this part and ship it to your door. See its priceUpdated
2
Adjust
Change its numbers in the viewer for free, or ask the AI in the chat: wall thickness, hole size, the thing it clips onto. AI changes use 2 credits per request (1 for a quick edit, 3 for a redesign), paid with a plan from Maker at $7.99 a month, where the first 3 small changes are free.3Print
Download a watertight STL or 3MF free, with your numbers and hand edits, or G-code sliced for your printer at the same price. After an AI change the download is included in every plan (4 credits without one).
Dimensions of the ready-made model (editable)
| Parameter | Value |
|---|---|
| Wall/plate thickness | 2 mm |
| Canister base outer diameter | 68 mm |
| Ring band width | 8 mm |
| Leg length from ring edge | 40 mm |
| Leg width | 12 mm |
| Foot pad diameter | 16 mm |
| Clearance around canister base | 0.4 mm |
Example prompt
Model a 110 g canister stand, three 40 mm legs, PocketRocket 2 clearance, 2 mm PETG.
Fit notes
A tall pot on a 110 g can is a tip. In SpeakCAD you pick 110 or 230, preview the stand in the browser, then download the STL.
Questions people ask about an MSR PocketRocket 2 110 g canister stand
A three-leg stand that widens a 110 g canister under a PocketRocket 2 so it does not tip a 1 L pot. Print in PETG.
Click Open it free on this page and create a free account (no card): the ready-made model opens in your browser, on your phone or computer, nothing to install. Change its numbers in the viewer for free and download a watertight STL or 3MF free, or G-code sliced for your printer at the same price. An AI change in the chat uses 2 credits per request (3 for a redesign), and the download after it is included in every plan (4 credits without one). Start with Maker: 50 credits a month for $7.99, cancel anytime.
On this page: open the ready-made model free in a SpeakCAD account (no card), change any dimension in the viewer, then download the STL or 3MF free, or G-code sliced for your printer at the same price.
A shared STL is modelled for someone else's measurements. Here you open the ready-made model free, change it to your measurements in the viewer, then download a file sized for the part you actually own, free as STL or 3MF.
Yes. SpeakCAD slices the part on its servers with OrcaSlicer and your printer's official profile (380+ printers, including Bambu Lab, Prusa, Creality and Elegoo), and you download the G-code (a sliced .gcode.3mf for Bambu Lab printers). G-code sliced for your printer costs the same as the STL: included in every plan, free for a part you shaped by hand, 4 credits without a plan for a part with AI work in it. Pick your printer on the printers page to see its profile.
No. SpeakCAD runs in the browser on your phone or computer: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL, 3MF or sliced G-code.
Print it your way
More garden & outdoor
Raised bed corner connectorReady-made, opens free. Timber raised beds are quickest to build when the boards slot into corner connectors instead of being screwed at awkward angles.Compost aerator tool headReady-made, opens free. A compost heap breaks down faster when air gets into the middle, and this aerator head turns a broom handle into a plunging turner.Tent stake puller hook for MSR Groundhog stakesReady-made, opens free. A palm-sized hook that slides under the notched head of an MSR Groundhog, Mini Groundhog or any Y-beam stake and pulls it out of packed ground without bendin…Cowboy Cruiser ST phone-pad riserReady-made, opens free. A 15 mm riser under a Cowboy phone pad so a MagSafe case still sits flush on the stem.Hammerhead Karoo 3 out-front mountReady-made, opens free. An out-front for a Karoo 3 on 31.8 mm bars with the official 4-hole pattern and a 20 mm GoPro boss.Petzl Actik Core bike-helmet mountReady-made, opens free. A mount that puts an Actik Core on a bike-helmet vent, 20 mm snap and the official 25 mm lamp plate.