1
Garden & outdoor
Raised bed corner connector
Timber raised beds are quickest to build when the boards slot into corner connectors instead of being screwed at awkward angles. This connector accepts two 150 x 25 mm boards at 90 degrees in 26 mm wide, 60 mm deep pockets, with 4 mm walls, screw holes per pocket, a stacking peg on top and a matching socket underneath so beds can be built two boards high. Print it upright in PETG or ASA with 5 walls; PLA will not survive wet soil and summer heat. Open the ready-made model free, resize it on your phone or computer, then download a print-ready STL, 3MF or G-code sliced for your printer, free.Opening the ready-made model and downloading it as STL or 3MF are free, no card; AI changes use credits, from Maker at $7.99 a month.No printer? We print this part and ship it to your door. See its priceUpdated
2
Adjust
Change its numbers in the viewer for free, or ask the AI in the chat: wall thickness, hole size, the thing it clips onto. AI changes use 2 credits per request (1 for a quick edit, 3 for a redesign), paid with a plan from Maker at $7.99 a month.3Print
Download a watertight STL or 3MF free, with your numbers and hand edits, or G-code sliced for your printer at the same price. After an AI change the download is included in every plan (4 credits without one).
Dimensions of the ready-made model (editable)
| Parameter | Value |
|---|---|
| board thickness | 25 mm |
| board pocket depth (width of board face) | 60 mm |
| board height | 150 mm |
| wall thickness | 4 mm |
Example prompt
Design a raised bed corner connector for two boards 150 mm tall and 25 mm thick meeting at 90 degrees: pockets 26 x 60 mm and 150 mm tall, 4 mm walls, four 5 mm screw holes per side, a 20 mm stacking peg on top and matching socket below.
Fit notes
Board sizes differ by region and supplier, so SpeakCAD sizes the pockets to the timber you actually bought, and can produce a three-way or angled version for hexagonal beds. Open the ready-made model free, change its numbers in the viewer and download the STL or 3MF free; AI changes use credits.
Questions people ask about a raised bed corner connector
Timber raised beds are quickest to build when the boards slot into corner connectors instead of being screwed at awkward angles. This connector accepts two 150 x 25 mm boards at 90 degrees in 26 mm wide, 60 mm deep pockets, with 4 mm walls, screw holes per pocket, a stacking peg on top and a matching socket underneath so beds can be built two boards high. Print it upright in PETG or ASA with 5 walls; PLA will not survive wet soil and summer heat.
Click Open it free on this page and create a free account (no card): the ready-made model opens in your browser, on your phone or computer, nothing to install. Change its numbers in the viewer for free and download a watertight STL or 3MF free, or G-code sliced for your printer at the same price. An AI change in the chat uses 2 credits per request (3 for a redesign), and the download after it is included in every plan (4 credits without one). Start with Maker: 50 credits a month for $7.99, cancel anytime.
On this page: open the ready-made model free in a SpeakCAD account (no card), change any dimension in the viewer, then download the STL or 3MF free, or G-code sliced for your printer at the same price.
A shared STL is modelled for someone else's measurements. Here you open the ready-made model free, change it to your measurements in the viewer, then download a file sized for the part you actually own, free as STL or 3MF.
Yes. SpeakCAD slices the part on its servers with OrcaSlicer and your printer's official profile (380+ printers, including Bambu Lab, Prusa, Creality and Elegoo), and you download the G-code (a sliced .gcode.3mf for Bambu Lab printers). G-code sliced for your printer costs the same as the STL: included in every plan, free for a part you shaped by hand, 4 credits without a plan for a part with AI work in it. Pick your printer on the printers page to see its profile.
No. SpeakCAD runs in the browser on your phone or computer: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL, 3MF or sliced G-code.
Print it your way
More garden & outdoor
Cowboy Cruiser ST phone-pad riserReady-made, opens free. A 15 mm riser under a Cowboy phone pad so a MagSafe case still sits flush on the stem.Hammerhead Karoo 3 out-front mountReady-made, opens free. An out-front for a Karoo 3 on 31.8 mm bars with the official 4-hole pattern and a 20 mm GoPro boss.Black Diamond Spot 400 helmet clipReady-made, opens free. A clip that puts a Spot 400 on a vented helmet without the official kit, 18 mm vent snap and a 25 mm lamp saddle.Garden tool handle clips for shed railReady-made, opens free. Rakes, hoes and spades lean in a corner until a clip system holds them upright by the handle.Compost aerator tool headReady-made, opens free. A compost heap breaks down faster when air gets into the middle, and this aerator head turns a broom handle into a plunging turner.Tent stake puller hook for MSR Groundhog stakesReady-made, opens free. A palm-sized hook that slides under the notched head of an MSR Groundhog, Mini Groundhog or any Y-beam stake and pulls it out of packed ground without bendin…