1
The prompt on this page opens in SpeakCAD already filled in — after sign-in too. The model renders in your browser. Preview is free.Garden & outdoor
Hammerhead Karoo 3 out-front mount
This is not a fixed STL. SpeakCAD generates the hammerhead karoo 3 out-front mount to your millimetres, you adjust it in the chat, then you download and print it.2
Change any millimetre in the chat: wall thickness, hole size, the thing it clips onto. Iterations stay in the tab until it matches what you own.Adjust
3Print
Download a watertight STL or 3MF for 2 credits, drop it in your slicer, and print it. Small fit fixes re-download free.Get it nowThe example prompt comes with you, even through sign-in. Preview is free; a download costs 2 credits.
What a hammerhead karoo 3 out-front mount is
An out-front for a Karoo 3 on 31.8 mm bars with the official 4-hole pattern and a 20 mm GoPro boss. Print in PETG.
A Karoo 2 mount is 8 mm too narrow. In SpeakCAD you set the bar, preview the mount in the browser without paying, then download the STL.
Example prompt
Model a Karoo 3 out-front, 31.8 mm clamp, official 4-hole, 20 mm GoPro boss, 2.4 mm PETG.
People also search
karoo 3 mount stlhammerhead karoo 3 out front 3d printkaroo 3 31.8 mountkaroo 3 gopro mount 3d model
Questions people ask about a hammerhead karoo 3 out-front mount
An out-front for a Karoo 3 on 31.8 mm bars with the official 4-hole pattern and a 20 mm GoPro boss. Print in PETG.
Click Get it now on this page: the example prompt is filled in for you after you sign in. The model renders in your browser — nothing to install — and previewing is free. Adjust any millimetre in the chat, then export a watertight STL or 3MF for 2 credits when you want to print.
Start from this working example and replace any number with what you measured: Model a Karoo 3 out-front, 31.8 mm clamp, official 4-hole, 20 mm GoPro boss, 2.4 mm PETG.
A Karoo 2 mount is 8 mm too narrow. In SpeakCAD you generate and preview for free, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More garden & outdoor
Tent guy line tensioner for 3 mm reflective cordA three-hole line tensioner for the 2 to 3 mm reflective guy cord used on MSR, Big Agnes, Nemo and Decathlon Quechua tents, replacing the sliders that snap i…Trek Rail Bosch charger holsterA garage holster that parks a Bosch 4A charger and the Rail's charge-port cap on a 4.5 mm hole pair.Garmin Edge 1050 out-front mount 31.8 mmAn out-front mount for an Edge 1050 on a 31.8 mm bar with the quarter-turn head and a 20 mm GoPro boss underneath.Black Diamond Spot 400 helmet clipA clip that puts a Spot 400 on a vented helmet without the official kit, 18 mm vent snap and a 25 mm lamp saddle.Self-watering pot insert with wickA self-watering insert sits inside a standard pot and lets a wick draw water up from a reservoir, so plants stay hydrated during a week away.Outdoor tap frost coverA frozen outside tap can split the pipe behind the wall, and a snug cover traps air around it through winter.