1
Garden & outdoor
Trek Rail Bosch charger holster
A garage holster that parks a Bosch 4A charger and the Rail's charge-port cap on a 4.5 mm hole pair. The well is 180 × 80 × 50 mm. Print in PETG. Open the ready-made model free, resize it on your phone or computer, then download a print-ready STL, 3MF or G-code sliced for your printer, free.Opening the ready-made model and downloading it as STL or 3MF are free, no card; AI changes use credits, from Maker at $7.99 a month.No printer? We print this part and ship it to your door. See its priceUpdated
2
Adjust
Change its numbers in the viewer for free, or ask the AI in the chat: wall thickness, hole size, the thing it clips onto. AI changes use 2 credits per request (1 for a quick edit, 3 for a redesign), paid with a plan from Maker at $7.99 a month, where the first 3 small changes are free.3Print
Download a watertight STL or 3MF free, with your numbers and hand edits, or G-code sliced for your printer at the same price. After an AI change the download is included in every plan (4 credits without one).
Dimensions of the ready-made model (editable)
| Parameter | Value |
|---|---|
| Wall thickness | 2 mm |
| Outer length (X) | 180 mm |
| Outer width (Y) | 80 mm |
| Outer height (Z) | 50 mm |
| Cap well length (X) | 40 mm |
| Cap well width (Y) | 30 mm |
| Cap well recess depth | 8 mm |
| Mounting hole diameter | 4.5 mm |
| Hole distance from each end (X) | 20 mm |
Example prompt
Create a Bosch charger holster 180×80×50 mm with a cap well and two 4.5 mm holes, 2 mm PETG.
Fit notes
The charger on the floor is a trip. In SpeakCAD you measure the brick, preview the holster in the browser, then download the STL.
Questions people ask about a Trek Rail Bosch charger holster
A garage holster that parks a Bosch 4A charger and the Rail's charge-port cap on a 4.5 mm hole pair. The well is 180 × 80 × 50 mm. Print in PETG.
Click Open it free on this page and create a free account (no card): the ready-made model opens in your browser, on your phone or computer, nothing to install. Change its numbers in the viewer for free and download a watertight STL or 3MF free, or G-code sliced for your printer at the same price. An AI change in the chat uses 2 credits per request (3 for a redesign), and the download after it is included in every plan (4 credits without one). Start with Maker: 50 credits a month for $7.99, cancel anytime.
On this page: open the ready-made model free in a SpeakCAD account (no card), change any dimension in the viewer, then download the STL or 3MF free, or G-code sliced for your printer at the same price.
A shared STL is modelled for someone else's measurements. Here you open the ready-made model free, change it to your measurements in the viewer, then download a file sized for the part you actually own, free as STL or 3MF.
Yes. SpeakCAD slices the part on its servers with OrcaSlicer and your printer's official profile (380+ printers, including Bambu Lab, Prusa, Creality and Elegoo), and you download the G-code (a sliced .gcode.3mf for Bambu Lab printers). G-code sliced for your printer costs the same as the STL: included in every plan, free for a part you shaped by hand, 4 credits without a plan for a part with AI work in it. Pick your printer on the printers page to see its profile.
No. SpeakCAD runs in the browser on your phone or computer: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL, 3MF or sliced G-code.
Print it your way
More garden & outdoor
Raised bed corner connectorReady-made, opens free. Timber raised beds are quickest to build when the boards slot into corner connectors instead of being screwed at awkward angles.Compost aerator tool headReady-made, opens free. A compost heap breaks down faster when air gets into the middle, and this aerator head turns a broom handle into a plunging turner.Tent stake puller hook for MSR Groundhog stakesReady-made, opens free. A palm-sized hook that slides under the notched head of an MSR Groundhog, Mini Groundhog or any Y-beam stake and pulls it out of packed ground without bendin…VanMoof S5 rear-fender mudflapReady-made, opens free. A 120 × 80 mm mudflap that clips onto an S5 rear fender so the motor does not get a stripe.Kuat NV 2.0 ratchet-handle hookReady-made, opens free. A hook that parks an NV 2.0 ratchet handle so it does not swing into the tailgate, 16 mm snap.Petzl Actik Core bike-helmet mountReady-made, opens free. A mount that puts an Actik Core on a bike-helmet vent, 20 mm snap and the official 25 mm lamp plate.