1
The prompt on this page opens in SpeakCAD already filled in — after sign-in too. The model renders in your browser. Preview is free.Replacement parts
IKEA KALLAX 40 mm foot riser with caster boss
This is not a fixed STL. SpeakCAD generates the ikea kallax 40 mm foot riser with caster boss to your millimetres, you adjust it in the chat, then you download and print it.2
Change any millimetre in the chat: wall thickness, hole size, the thing it clips onto. Iterations stay in the tab until it matches what you own.Adjust
3Print
Download a watertight STL or 3MF for 2 credits, drop it in your slicer, and print it. Small fit fixes re-download free.Get it nowThe example prompt comes with you, even through sign-in. Preview is free; a download costs 2 credits.
What a ikea kallax 40 mm foot riser with caster boss is
A 40 mm riser that replaces a KALLAX foot and adds a 10 mm boss for a plate caster so the unit rolls. The top is the stock 15 mm square recess. Print four in PETG.
Stock feet scratch the floor. In SpeakCAD you pick caster size, preview the riser in the browser without paying, then download the STL.
Example prompt
Model a KALLAX riser 40 mm tall, 15 mm square top recess, 10 mm caster boss, PETG, print four.
People also search
kallax caster riser stlikea kallax wheel feet 3d printkallax 40mm riserkallax rolling feet 3d model
Questions people ask about a ikea kallax 40 mm foot riser with caster boss
A 40 mm riser that replaces a KALLAX foot and adds a 10 mm boss for a plate caster so the unit rolls. The top is the stock 15 mm square recess. Print four in PETG.
Click Get it now on this page: the example prompt is filled in for you after you sign in. The model renders in your browser — nothing to install — and previewing is free. Adjust any millimetre in the chat, then export a watertight STL or 3MF for 2 credits when you want to print.
Start from this working example and replace any number with what you measured: Model a KALLAX riser 40 mm tall, 15 mm square top recess, 10 mm caster boss, PETG, print four.
Stock feet scratch the floor. In SpeakCAD you generate and preview for free, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More replacement parts
Makita MAKPAC latch replacement clipA clip that replaces a cracked MAKPAC lid latch so the box still closes.Cabinet hinge mounting plate replacementConcealed cabinet hinges clip onto a small mounting plate screwed to the carcass, and when the plate cracks the door sags or falls off.Yeti Rambler MagSlider lid slider replacementThe magnetic slider on a Yeti Rambler 20 oz or 30 oz tumbler lid is the part that goes through the dishwasher, gets lost, and costs almost as much as a new lid.Track-saw splinter-guard replacement stripA 1400 mm splinter-guard strip in 200 mm sections that clip onto a Festool / Makita style track's 4 mm T-slot.Salomon ADV Skin flask-valve capA cap that covers an ADV Skin flask bite valve in a bag so it does not leak, 18 mm snap.IKEA BILLY OXBERG door soft bumpA bump that sits on a BILLY OXBERG glass or panel door so it does not rattle against the bookcase.