1
Replacement parts
Voron 2.4 rear spool holder for 2020 frame
This is not a fixed STL. SpeakCAD generates the voron 2.4 rear spool holder for 2020 frame to your millimetres, you adjust it in the chat, then you download and print it.Building the 3D preview…
2
Adjust
Click a part and change its numbers in the viewer, or ask the AI in the chat: wall thickness, hole size, the thing it clips onto. AI changes use plan credits.3Print
Download a watertight STL or 3MF with a Maker or Pro plan, drop it in your slicer, and print it. Small fit fixes re-download free.
Get it nowOpening the ready-made model is free. A plan covers AI changes and the download.
Example prompt
Model a rear spool holder for a Voron 2020 frame, two M5 T-nut holes 20 mm apart, 52 mm hub 75 mm long, two 608 bearings, end lip.
What a voron 2.4 rear spool holder for 2020 frame is
A rear spool holder that bolts to the 2020 frame of a Voron 2.4 with two M5 T-nuts 20 mm apart and carries a 1 kg spool on two 608 bearings (22 × 8 × 7 mm). The hub is 52 mm across for 52 to 56 mm bores, 75 mm long, with a lip that keeps the spool from walking off. Print in ASA or PETG, base flat.
On a Trident the rear extrusions are the same, but the spool sits lower because the frame is shorter. Open the ready-made holder in SpeakCAD for free, change the hub in the viewer or the chat, then download the STL.
People also search
voron spool holder stlvoron 2.4 spool holder2020 spool holder bearingvoron spool holder 3d print
Questions people ask about a voron 2.4 rear spool holder for 2020 frame
A rear spool holder that bolts to the 2020 frame of a Voron 2.4 with two M5 T-nuts 20 mm apart and carries a 1 kg spool on two 608 bearings (22 × 8 × 7 mm). The hub is 52 mm across for 52 to 56 mm bores, 75 mm long, with a lip that keeps the spool from walking off. Print in ASA or PETG, base flat.
Click Get it now on this page and sign in: you can open the ready-made model for free, and the example prompt is filled in if you want the AI to redesign it. The model renders in your browser, nothing to install. Change any millimetre in the viewer or the chat (AI changes use plan credits), then export a watertight STL or 3MF with a Maker or Pro plan when you want to print.
Start from this working example and replace any number with what you measured: Model a rear spool holder for a Voron 2020 frame, two M5 T-nut holes 20 mm apart, 52 mm hub 75 mm long, two 608 bearings, end lip.
On a Trident the rear extrusions are the same, but the spool sits lower because the frame is shorter. In SpeakCAD you open the ready-made model for free, change it to your measurements, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More replacement parts
IKEA MALM drawer soft-close bumperA bumper that sits on a MALM drawer runner so the 80 or 160 cm drawer does not slam into the carcass.Bambu Lab X1 Carbon lid riser corner spacersFour corner spacers that raise the glass top of an X1 Carbon (389 × 389 × 457 mm) by 20 mm, letting warm air out when printing PLA or PETG so the chamber doe…Siemens dishwasher cup shelf support clipA support clip for the fold-down cup shelf in the upper basket of Siemens and Bosch dishwashers, which holds the shelf level when it is folded down.De'Longhi Dedica steam knobA replacement steam knob for the De'Longhi Dedica EC680 and EC685, about 30 mm across and 18 mm deep.Oven control knob for D-shaftA cracked oven knob slips on its shaft and makes setting temperature a guess.IKEA Bekvam step stool anti-slip foot replacementA replacement foot for the IKEA Bekvam step stool that covers the raw end of each leg when the original plastic glide falls off or the wood starts scratching…