Replacement parts

CamelBak bite valve dust cover cap replacement

The hinged dust cover on a CamelBak Big Bite valve or Crux tube gets chewed off or lost on the first ride, leaving the valve to collect trail grit. This replacement is a 22 mm inner diameter cap with 1.5 mm walls that snaps over the valve's collar, a 3 mm hinge strap that loops around the 12 mm tube behind the valve so the cap dangles when open, and a small pull tab. Print it in TPU 95A for a soft, food-safe-adjacent seal and a quiet snap; PETG works for a rigid version.

Bite valves from CamelBak, Osprey Hydraulics and Source all differ by a couple of millimetres, so a downloaded cap either will not snap on or falls off in the pack. Measure your valve collar and tube, give the numbers to SpeakCAD, preview the cap free in the browser, refine the snap in the chat, then download the STL.

Get it nowGenerate and preview for free, in your browser. A download costs 2 credits.

Model a bite valve dust cap with a 22 mm inner diameter, 12 mm deep pocket and 1.5 mm walls, a 0.8 mm inward snap lip, a 3 mm wide 40 mm long hinge strap ending in a 12.4 mm ring for the drink tube and a 6 mm pull tab.

Change any number to match what you measured. The AI keeps the rest of the design consistent, and small follow-up edits after a download are free.

More replacement parts

Dishwasher rack wheel replacementWhen a lower rack wheel cracks the whole basket drags and jams, yet the original spare often costs more than a set of four printed ones.Washing machine door handle replacementFront-loader door handles snap at the pivot lugs after years of use, and manufacturers frequently charge a premium for a small plastic lever.Cordless drill battery latch buttonThe spring-loaded latch button that locks a battery pack into a cordless drill wears out or snaps its tab, so the pack slides off mid-job.Blender lid center capThe removable center cap of a blender lid gets lost or cracked, and without it every smoothie splashes the counter.Headset spacer set for 1 1/8 inch 28.6 mm steererStack-height spacers for a 1 1/8 inch fork steerer, 28.6 mm nominal, in 2.5, 5, 10 and 15 mm thicknesses so you can dial in bar height on a Canyon, Trek or S…Salomon Quicklace cord lock replacementSalomon Speedcross, Sense Ride and XA Pro trail shoes use a Quicklace system with a small two-hole cord lock that eventually cracks or loses its spring.

Make your camelbak bite valve dust cover cap replacement now

Nothing to install and no CAD skills needed. Describe it, watch it render, download the STL or 3MF and print it tonight.

Get it nowBrowse the library
Looking for a ready-made version? Check the marketplace, where makers sell finished, rated models for credits.