1
The prompt on this page opens in SpeakCAD already filled in — after sign-in too. The model renders in your browser. Preview is free.Replacement parts
SwitchBot Curtain 3 rod clamp for 28 mm poles
This is not a fixed STL. SpeakCAD generates the switchbot curtain 3 rod clamp for 28 mm poles to your millimetres, you adjust it in the chat, then you download and print it.2
Change any millimetre in the chat: wall thickness, hole size, the thing it clips onto. Iterations stay in the tab until it matches what you own.Adjust
3Print
Download a watertight STL or 3MF for 2 credits, drop it in your slicer, and print it. Small fit fixes re-download free.Get it nowThe example prompt comes with you, even through sign-in. Preview is free; a download costs 2 credits.
What a switchbot curtain 3 rod clamp for 28 mm poles is
A replacement clamp that lets a SwitchBot Curtain 3 ride a 28 mm wooden pole instead of the IKEA 25 mm it shipped with. The clamp is a 32 mm split ring with 2 mm walls, an M3 pinch bolt, and the official 8 mm hook pocket on the bottom. Print in PETG with 0.2 mm bolt clearance.
The stock clamp slips on a 28 mm rod. In SpeakCAD you measure the pole, preview the clamp in the browser for free, then download the STL.
Example prompt
Create a SwitchBot Curtain 3 clamp: 32 mm split ring for a 28 mm pole, 2 mm PETG walls, M3 pinch bolt with 0.2 mm clearance and an 8 mm hook pocket.
People also search
switchbot curtain 3 clamp stlswitchbot 28mm rod adapter 3d printswitchbot curtain pole clampswitchbot curtain 3 28 mm mount
Questions people ask about a switchbot curtain 3 rod clamp for 28 mm poles
A replacement clamp that lets a SwitchBot Curtain 3 ride a 28 mm wooden pole instead of the IKEA 25 mm it shipped with. The clamp is a 32 mm split ring with 2 mm walls, an M3 pinch bolt, and the official 8 mm hook pocket on the bottom. Print in PETG with 0.2 mm bolt clearance.
Click Get it now on this page: the example prompt is filled in for you after you sign in. The model renders in your browser — nothing to install — and previewing is free. Adjust any millimetre in the chat, then export a watertight STL or 3MF for 2 credits when you want to print.
Start from this working example and replace any number with what you measured: Create a SwitchBot Curtain 3 clamp: 32 mm split ring for a 28 mm pole, 2 mm PETG walls, M3 pinch bolt with 0.2 mm clearance and an 8 mm hook pocket.
The stock clamp slips on a 28 mm rod. In SpeakCAD you generate and preview for free, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More replacement parts
ecobee Smart Thermostat Enhanced wall shimA 6–12 mm stepped shim that sits behind an ecobee Smart Thermostat Enhanced (about 109 mm round) so the unit sits flush on a tiled wall.Thule EasyFold wheel-tray end capA replacement end cap for a Thule EasyFold wheel tray, 40 × 25 mm with the stock 4 mm rib.IKEA BROR caster brake wedgeA wedge that chocks a BROR 100 mm caster so the trolley does not roll when you open a drawer.IKEA SKOGSTA stool foot-cap setCaps for SKOGSTA stool legs (about 35 × 35 mm) so the shorter acacia stool does not mark a floor.Toy car wheel and axle replacementRide-on and push-along toy cars lose wheels when the axle cap or hub snaps, and spare parts are rarely sold separately.Osprey backpack sternum strap buckle replacementThe sliding sternum strap buckle on Osprey Talon, Stratos and Atmos packs (and similar Deuter and Gregory ones) rides along a webbing rail and cracks after a…