1
The prompt on this page opens in SpeakCAD already filled in — after sign-in too. The model renders in your browser. Preview is free.Replacement parts
Nanoleaf Shapes 10 mm corner spacer
This is not a fixed STL. SpeakCAD generates the nanoleaf shapes 10 mm corner spacer to your millimetres, you adjust it in the chat, then you download and print it.2
Change any millimetre in the chat: wall thickness, hole size, the thing it clips onto. Iterations stay in the tab until it matches what you own.Adjust
3Print
Download a watertight STL or 3MF for 2 credits, drop it in your slicer, and print it. Small fit fixes re-download free.Get it nowThe example prompt comes with you, even through sign-in. Preview is free; a download costs 2 credits.
What a nanoleaf shapes 10 mm corner spacer is
A 10 mm spacer that sits behind a Shapes panel so a corner that is out of plane still clicks. The plate matches the official 25 mm link. Print in PLA.
A twisted corner pops the hex. In SpeakCAD you pick the gap, preview the spacer in the browser at no cost, then download the STL.
Example prompt
Design a Shapes corner spacer 10 mm thick with the 25 mm official link pattern, 1.6 mm walls.
People also search
nanoleaf shapes spacer stlnanoleaf corner shim 3d printshapes 10mm spacernanoleaf panel spacer 3d model
Questions people ask about a nanoleaf shapes 10 mm corner spacer
A 10 mm spacer that sits behind a Shapes panel so a corner that is out of plane still clicks. The plate matches the official 25 mm link. Print in PLA.
Click Get it now on this page: the example prompt is filled in for you after you sign in. The model renders in your browser — nothing to install — and previewing is free. Adjust any millimetre in the chat, then export a watertight STL or 3MF for 2 credits when you want to print.
Start from this working example and replace any number with what you measured: Design a Shapes corner spacer 10 mm thick with the 25 mm official link pattern, 1.6 mm walls.
A twisted corner pops the hex. In SpeakCAD you generate and preview for free, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More replacement parts
IKEA IVAR 6 mm shelf-pin replacementA 6 mm pin that replaces a lost IVAR metal pin so a pine shelf sits level in the 30 or 50 cm side unit.IKEA POÄNG ottoman felt glidesGlides that replace worn POÄNG ottoman feet (about 28 × 18 mm) so the stool slides without scratching.Sliding wardrobe door roller carriageSliding wardrobe doors ride on small roller carriages that split along the axle after years of use, making the door drop and scrape.Kuat NV bike rack wheel tray end capThe plastic caps on the ends of Kuat NV and Sherpa wheel trays crack in the cold and let water into the extrusion.Stryd foot-pod shoe-clip spareA spare clip that holds a Stryd running pod (about 28 × 25 × 10 mm) on a lacing pattern 8–14 mm wide.Roomba j9+ cliff-sensor shimA 1.2 mm shim that sits under a j9+ cliff sensor so dark hardwood is not read as a stair.