1
Replacement parts
Creality Ender-3 V3 SE spool holder with 608 bearings
This is not a fixed STL. SpeakCAD generates the creality ender-3 v3 se spool holder with 608 bearings to your millimetres, you adjust it in the chat, then you download and print it.Building the 3D preview…
2
Adjust
Click a part and change its numbers in the viewer, or ask the AI in the chat: wall thickness, hole size, the thing it clips onto. AI changes use plan credits.3Print
Download a watertight STL or 3MF with a Maker or Pro plan, drop it in your slicer, and print it. Small fit fixes re-download free.
Get it nowOpening the ready-made model is free. A plan covers AI changes and the download.
Example prompt
Design a spool hub with two 608 bearings, 52 mm diameter, 22.1 mm bearing seats at each end, 8 mm axle, for 52 to 56 mm bores.
What a creality ender-3 v3 se spool holder with 608 bearings is
A replacement spool holder hub for the top of an Ender-3 V3 SE that spins on two 608 bearings (22 × 8 × 7 mm) instead of plastic on plastic, which cuts under-extrusion on long prints. The hub is 52 mm across to fit spool bores of 52 to 56 mm, with a 22.1 mm bearing seat at each end and an 8 mm axle. Print in PETG, one end at a time.
Cardboard spools with a 38 mm bore need a thinner hub. Open the ready-made hub in SpeakCAD for free, change the hub diameter in the viewer or the chat, then download the STL.
People also search
ender 3 v3 se spool holder stlender 3 spool bearing hub608 bearing spool holderender 3 spool holder 3d print
Questions people ask about a creality ender-3 v3 se spool holder with 608 bearings
A replacement spool holder hub for the top of an Ender-3 V3 SE that spins on two 608 bearings (22 × 8 × 7 mm) instead of plastic on plastic, which cuts under-extrusion on long prints. The hub is 52 mm across to fit spool bores of 52 to 56 mm, with a 22.1 mm bearing seat at each end and an 8 mm axle. Print in PETG, one end at a time.
Click Get it now on this page and sign in: you can open the ready-made model for free, and the example prompt is filled in if you want the AI to redesign it. The model renders in your browser, nothing to install. Change any millimetre in the viewer or the chat (AI changes use plan credits), then export a watertight STL or 3MF with a Maker or Pro plan when you want to print.
Start from this working example and replace any number with what you measured: Design a spool hub with two 608 bearings, 52 mm diameter, 22.1 mm bearing seats at each end, 8 mm axle, for 52 to 56 mm bores.
Cardboard spools with a 38 mm bore need a thinner hub. In SpeakCAD you open the ready-made model for free, change it to your measurements, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More replacement parts
DeWalt TSTAK lid latch clip replacementA replacement side latch for DeWalt TSTAK II, IV and VI cases, whose clear polycarbonate latches crack at the pivot when the case is carried by one handle.Manfrotto Befree centre-column hookA hook that hangs a bag from a Befree centre column so the tripod stays put in wind, 12 mm snap.DeWalt TOUGHSYSTEM DS150 latch guardA guard that sits over a DS150 metal latch so it does not catch on a truck liner.Bambu Lab P1S riser feetFour riser feet that lift a P1S (389 × 389 × 458 mm) by 30 mm, so the bottom stays cool, the power cable can pass underneath and the door clears a desk lip.Dyson V8 trigger lock clipA clip that holds the power trigger of a Dyson V6, V7 or V8 down so you do not have to squeeze it for the whole clean.Window blind tilt wand clipThe small plastic hook that connects a venetian blind tilt wand to the headrail is often the first thing to break, leaving the slats stuck.