Replacement parts

Sliding wardrobe door roller carriage

Sliding wardrobe doors ride on small roller carriages that split along the axle after years of use, making the door drop and scrape. A carriage is a 60 x 20 x 35 mm body with a 28 mm diameter, 6 mm wide wheel on a 4 mm steel axle, two M4 mounting holes 40 mm apart and a rim that keeps the wheel in the track channel. Print the body flat in PETG at 100 percent infill and the wheel on its face so the tread is smooth.

SpeakCAD generates both parts to the measurements of your track and door bracket rather than a generic profile, so the door hangs at the right height again. If the wheel rubs, ask for a narrower tread and regenerate. Seeing the model in your browser costs nothing.

Get it nowGenerate and preview for free, in your browser. A download costs 2 credits.

Design a sliding door roller carriage: body 60 x 20 x 35 mm with two 4.2 mm mounting holes 40 mm apart, a slot for a 28 mm diameter 6 mm wide wheel with 1 mm clearance, a 4.1 mm axle hole, and the wheel as a separate part.

Change any number to match what you measured. The AI keeps the rest of the design consistent, and small follow-up edits after a download are free.

More replacement parts

Suitcase wheel housing replacementA broken corner wheel housing turns a good suitcase into landfill, yet the part is just a bracket that holds a 50 mm wheel on a 6 mm axle.Toy car wheel and axle replacementRide-on and push-along toy cars lose wheels when the axle cap or hub snaps, and spare parts are rarely sold separately.Extension cord reel crank handleCable reels are wound by a folding crank handle whose plastic knob and pivot break long before the cable does.Hose reel side cover latchWall-mounted hose reels keep their spool cover on with a rotating latch that fatigues in sunlight and snaps, letting the cover flap loose.CamelBak bite valve dust cover cap replacementThe hinged dust cover on a CamelBak Big Bite valve or Crux tube gets chewed off or lost on the first ride, leaving the valve to collect trail grit.DeWalt TSTAK lid latch clip replacementA replacement side latch for DeWalt TSTAK II, IV and VI cases, whose clear polycarbonate latches crack at the pivot when the case is carried by one handle.

Make your sliding wardrobe door roller carriage now

Nothing to install and no CAD skills needed. Describe it, watch it render, download the STL or 3MF and print it tonight.

Get it nowBrowse the library
Looking for a ready-made version? Check the marketplace, where makers sell finished, rated models for credits.