Replacement parts

Hose reel side cover latch

Wall-mounted hose reels keep their spool cover on with a rotating latch that fatigues in sunlight and snaps, letting the cover flap loose. The latch is a 40 mm lever 12 mm wide with a 6 mm pivot hole, a 3 mm hook that engages the cover rim, and a small detent bump that holds it closed. Print it flat at 100 percent infill in ASA or PETG, which resist UV far better than PLA, and fillet the hook root where the original cracked.

Describe the pivot diameter and the hook reach of your reel to SpeakCAD and it generates a latch for that model, saving a search through obsolete part numbers. If it feels loose, adjust the detent height in the chat and regenerate. Generating and previewing costs nothing.

Get it nowGenerate and preview for free, in your browser. A download costs 2 credits.

Create a hose reel cover latch lever 40 x 12 x 6 mm with a 6.2 mm pivot hole at one end, a 3 mm deep retaining hook at the other, a 0.4 mm detent bump underneath 20 mm from the pivot, and 1 mm fillets on all edges.

Change any number to match what you measured. The AI keeps the rest of the design consistent, and small follow-up edits after a download are free.

More replacement parts

Milwaukee Packout tool box latch replacementA replacement for the front latch on Milwaukee Packout tool boxes and organizers, which snaps when the box is dropped on the latch face.IKEA Bekvam step stool anti-slip foot replacementA replacement foot for the IKEA Bekvam step stool that covers the raw end of each leg when the original plastic glide falls off or the wood starts scratching…Window blind tilt wand clipThe small plastic hook that connects a venetian blind tilt wand to the headrail is often the first thing to break, leaving the slats stuck.Oven control knob for D-shaftA cracked oven knob slips on its shaft and makes setting temperature a guess.Window handle with 7 mm square spindleTilt-and-turn and casement windows use an espagnolette handle on a 7 mm square spindle; when the original breaks the window is stuck.Curtain track glider setCurtain track gliders crack and stop sliding, leaving curtains bunched at one end, and matching the profile of an older track is rarely possible from a shop.

Make your hose reel side cover latch now

Nothing to install and no CAD skills needed. Describe it, watch it render, download the STL or 3MF and print it tonight.

Get it nowBrowse the library
Looking for a ready-made version? Check the marketplace, where makers sell finished, rated models for credits.