1
The prompt on this page opens in SpeakCAD already filled in — after sign-in too. The model renders in your browser. Preview is free.Hobby & gaming
Boss RC-5 pedalboard riser
This is not a fixed STL. SpeakCAD generates the boss rc-5 pedalboard riser to your millimetres, you adjust it in the chat, then you download and print it.2
Change any millimetre in the chat: wall thickness, hole size, the thing it clips onto. Iterations stay in the tab until it matches what you own.Adjust
3Print
Download a watertight STL or 3MF for 2 credits, drop it in your slicer, and print it. Small fit fixes re-download free.Get it nowThe example prompt comes with you, even through sign-in. Preview is free; a download costs 2 credits.
What a boss rc-5 pedalboard riser is
A 20 mm riser that lifts an RC-5 so you can hit it behind a row of 55 mm pedals, 75 × 65 mm with 3M-pad recesses. Print in PETG.
The RC-5 sits too low. In SpeakCAD you set the height, preview the riser in the browser at no cost, then download the STL.
Example prompt
Design an RC-5 riser 75×65×20 mm with 3M-pad recesses, 2 mm PETG.
People also search
boss rc-5 riser stlrc-5 pedalboard lift 3d printboss looper riserrc-5 stand 3d model
Questions people ask about a boss rc-5 pedalboard riser
A 20 mm riser that lifts an RC-5 so you can hit it behind a row of 55 mm pedals, 75 × 65 mm with 3M-pad recesses. Print in PETG.
Click Get it now on this page: the example prompt is filled in for you after you sign in. The model renders in your browser — nothing to install — and previewing is free. Adjust any millimetre in the chat, then export a watertight STL or 3MF for 2 credits when you want to print.
Start from this working example and replace any number with what you measured: Design an RC-5 riser 75×65×20 mm with 3M-pad recesses, 2 mm PETG.
The RC-5 sits too low. In SpeakCAD you generate and preview for free, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More hobby & gaming
WLED hex-panel stand for six cellsA stand that holds a six-cell WLED hex (about 300 mm across) at 15 degrees with a 20 mm USB-C well in the base.Nintendo Switch 2 game-card display rail 24A 280 mm rail that displays 24 Switch / Switch 2 game cards in 22 × 4 mm slots at 15 degrees.Sony FX30 cage NATO-rail stopA stop that clips onto an FX30 cage NATO rail (about 50 mm) so a handle does not slide off.Game controller stand for two padsA controller stand keeps two gamepads upright on a shelf instead of sliding around in a drawer, and it stops the analogue sticks getting crushed.Nintendo Switch game cartridge case for 24 cardsA slim two-part case with a sliding lid that holds 24 Nintendo Switch game cards in a 6 by 4 grid.Warhammer 40k 32 mm round base movement trayA skirmish movement tray that carries ten Warhammer 40,000 infantry on 32 mm round bases in two ranks of five, so a whole squad of Intercessors or Necron War…