1
Hobby & gaming
Roland AIRA Compact stacking stand
This is not a fixed STL. SpeakCAD generates the roland aira compact stacking stand to your millimetres, you adjust it in the chat, then you download and print it.Building the 3D preview…
2
Adjust
Click a part and change its numbers in the viewer, or ask the AI in the chat: wall thickness, hole size, the thing it clips onto. AI changes use plan credits.3Print
Download a watertight STL or 3MF with a Maker or Pro plan, drop it in your slicer, and print it. Small fit fixes re-download free.
Get it nowOpening the ready-made model is free. A plan covers AI changes and the download.
Example prompt
Design a two-tier stand for Roland AIRA Compact units, 190×108 mm shelves with 3 mm lips, upper shelf 50 mm higher at 15°, open sides.
What a roland aira compact stacking stand is
A two-tier stand for Roland AIRA Compact units (about 188 × 106 × 36 mm each, like the T-8, J-6, S-1 and E-4). Each shelf is 190 × 108 mm with a 3 mm front lip, the upper shelf sits 50 mm higher and tilts 15°, and gaps at the sides leave the USB-C and 3.5 mm jacks free. Print flat in PLA or PETG.
The Boutique series modules are a different size and need their own stand. Open the ready-made model in SpeakCAD for free, change any millimetre in the viewer or the chat, then download the STL.
People also search
aira compact stand stlroland t-8 stand 3d printroland s-1 standaira compact rack
Questions people ask about a roland aira compact stacking stand
A two-tier stand for Roland AIRA Compact units (about 188 × 106 × 36 mm each, like the T-8, J-6, S-1 and E-4). Each shelf is 190 × 108 mm with a 3 mm front lip, the upper shelf sits 50 mm higher and tilts 15°, and gaps at the sides leave the USB-C and 3.5 mm jacks free. Print flat in PLA or PETG.
Click Get it now on this page and sign in: you can open the ready-made model for free, and the example prompt is filled in if you want the AI to redesign it. The model renders in your browser, nothing to install. Change any millimetre in the viewer or the chat (AI changes use plan credits), then export a watertight STL or 3MF with a Maker or Pro plan when you want to print.
Start from this working example and replace any number with what you measured: Design a two-tier stand for Roland AIRA Compact units, 190×108 mm shelves with 3 mm lips, upper shelf 50 mm higher at 15°, open sides.
The Boutique series modules are a different size and need their own stand. In SpeakCAD you open the ready-made model for free, change it to your measurements, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More hobby & gaming
Xbox Elite Series 2 controller display standA display stand for the Xbox Elite Series 2 controller that shows off its rubberised grips and paddles while keeping it within reach of the console.WLED hex-panel stand for six cellsA stand that holds a six-cell WLED hex (about 300 mm across) at 15 degrees with a 20 mm USB-C well in the base.Flydigi Vader 4 Pro display standA stand that holds a Vader 4 Pro at 25 degrees with the RGB face visible and a 14 mm USB-C slot.Nintendo Switch 2 tabletop stand with USB-C gapA tabletop stand for the Nintendo Switch 2 (272 × 116 × 13.9 mm with Joy-Con 2 attached) that holds it at 65 degrees with a 16 mm deep slot and leaves a 20 m…Sim racing wheel wall hangerA wall hanger for detached sim racing wheel rims (most GT and round rims are 270 to 320 mm across) that holds the rim on a 50 mm wide curved cradle with a 15…Board game token tray with scoopsToken trays sort cardboard chits and wooden cubes into compartments with sloped scoop bottoms so you can pick pieces up with a fingertip.