1
Hobby & gaming
Funko Pop shelf riser three tier for boxed figures
A stepped riser that lifts the back rows of boxed Funko Pop figures so all three rows are visible on a normal bookshelf. A standard Pop box measures 115 x 90 x 160 mm, so each tier is 92 mm deep with a 2 mm rear lip, and the steps rise 55 mm each so the box behind clears the one in front while the shelf above stays free. The riser spans 480 mm for four boxes per row and prints as two 240 mm halves that slide together with a dovetail, each half laid on its side with 1.6 mm walls and a hollow interior to keep filament use low. Open the ready-made model free, resize it on your phone or computer, then download a print-ready STL, 3MF or G-code sliced for your printer, free.Opening the ready-made model and downloading it as STL or 3MF are free, no card; AI changes use credits, from Maker at $7.99 a month.No printer? We print this part and ship it to your door. See its priceUpdated
2
Adjust
Change its numbers in the viewer for free, or ask the AI in the chat: wall thickness, hole size, the thing it clips onto. AI changes use 2 credits per request (1 for a quick edit, 3 for a redesign), paid with a plan from Maker at $7.99 a month.3Print
Download a watertight STL or 3MF free, with your numbers and hand edits, or G-code sliced for your printer at the same price. After an AI change the download is included in every plan (4 credits without one).
Dimensions of the ready-made model (editable)
| Parameter | Value |
|---|---|
| total shelf width | 480 mm |
| depth of each tier (box depth 90 + lip) | 92 mm |
| height gain per step | 55 mm |
| rear lip height | 2 mm |
| wall thickness | 1.6 mm |
| base floor thickness | 6 mm |
| box height (for reference/clearance) | 160 mm |
Example prompt
Create a three-tier Funko Pop shelf riser 480 mm wide for boxes 115 x 90 x 160 mm, tiers 92 mm deep with a 2 mm rear lip rising 55 mm per step, printed as two 240 mm halves joined by a dovetail, 1.6 mm walls and a hollow interior.
Fit notes
Shelves come in hundreds of depths, which is why bought risers overhang or leave dead space. Give SpeakCAD your shelf depth and how many Pops per row, preview the riser in the browser, ask for a Soda-can-sized tier in the chat, then download the STL.
Questions people ask about a Funko Pop shelf riser three tier for boxed figures
A stepped riser that lifts the back rows of boxed Funko Pop figures so all three rows are visible on a normal bookshelf. A standard Pop box measures 115 x 90 x 160 mm, so each tier is 92 mm deep with a 2 mm rear lip, and the steps rise 55 mm each so the box behind clears the one in front while the shelf above stays free. The riser spans 480 mm for four boxes per row and prints as two 240 mm halves that slide together with a dovetail, each half laid on its side with 1.6 mm walls and a hollow interior to keep filament use low.
Click Open it free on this page and create a free account (no card): the ready-made model opens in your browser, on your phone or computer, nothing to install. Change its numbers in the viewer for free and download a watertight STL or 3MF free, or G-code sliced for your printer at the same price. An AI change in the chat uses 2 credits per request (3 for a redesign), and the download after it is included in every plan (4 credits without one). Start with Maker: 50 credits a month for $7.99, cancel anytime.
On this page: open the ready-made model free in a SpeakCAD account (no card), change any dimension in the viewer, then download the STL or 3MF free, or G-code sliced for your printer at the same price.
A shared STL is modelled for someone else's measurements. Here you open the ready-made model free, change it to your measurements in the viewer, then download a file sized for the part you actually own, free as STL or 3MF.
Yes. SpeakCAD slices the part on its servers with OrcaSlicer and your printer's official profile (380+ printers, including Bambu Lab, Prusa, Creality and Elegoo), and you download the G-code (a sliced .gcode.3mf for Bambu Lab printers). G-code sliced for your printer costs the same as the STL: included in every plan, free for a part you shaped by hand, 4 credits without a plan for a part with AI work in it. Pick your printer on the printers page to see its profile.
No. SpeakCAD runs in the browser on your phone or computer: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL, 3MF or sliced G-code.
Print it your way
More hobby & gaming
Lenovo Legion Go 2 kickstand extensionReady-made, opens free. An extension that adds 20 mm to a Legion Go 2 kickstand so the screen sits at 60 degrees on a couch.Round miniature bases with slotReady-made, opens free. Slotted round bases hold metal or resin miniatures with a tab underneath, and buying them in odd sizes gets expensive.Wall hook for headphones and cablesReady-made, opens free. A wall hook parks a headset or pair of studio headphones next to the desk and keeps the cable coiled below it.PS5 DualSense dual controller charging standReady-made, opens free. A twin-bay stand for two PlayStation 5 DualSense or DualSense Edge controllers (160 x 66 x 106 mm) that holds them face-out with their USB-C ports aligned ov…Hot Wheels wall display rack for carded carsReady-made, opens free. A wall rack for unopened Hot Wheels and Matchbox mainlines still on their blister cards, which measure 108 x 165 mm with the blister sticking out about 35 mm.Squishmallow display shelf 20 cmReady-made, opens free. A 200 mm shelf with a 25 mm lip that keeps a medium Squishmallow from rolling off.