1
The prompt on this page opens in SpeakCAD already filled in — after sign-in too. The model renders in your browser. Preview is free.Everyday fixes
AirTag hidden bike bottle-cage mount
This is not a fixed STL. SpeakCAD generates the airtag hidden bike bottle-cage mount to your millimetres, you adjust it in the chat, then you download and print it.2
Change any millimetre in the chat: wall thickness, hole size, the thing it clips onto. Iterations stay in the tab until it matches what you own.Adjust
3Print
Download a watertight STL or 3MF for 2 credits, drop it in your slicer, and print it. Small fit fixes re-download free.Get it nowThe example prompt comes with you, even through sign-in. Preview is free; a download costs 2 credits.
What a airtag hidden bike bottle-cage mount is
A 40 × 36 × 12 mm plate that hides an AirTag under a bottle cage so a thief does not see a hanging tag. Two 5 mm holes match a standard cage on 64 mm centres, the AirTag sits in a 32 mm well 8 mm deep, and a 1 mm snap lip keeps it in on cobbles. Print in PETG or TPU.
A steerer-cap or saddle-rail AirTag is a different hiding place. Describe the cage bolts in SpeakCAD, preview the plate in the browser without paying, then download the STL.
Example prompt
Model an AirTag bottle-cage mount 40×36×12 mm, 32 mm well 8 mm deep, two 5 mm holes on 64 mm centres, 1 mm snap lip, 1.6 mm PETG.
People also search
airtag bottle cage mount stlhidden airtag bike cage 3d printairtag bike tracker holderbottle cage airtag plate 3d model
Questions people ask about a airtag hidden bike bottle-cage mount
A 40 × 36 × 12 mm plate that hides an AirTag under a bottle cage so a thief does not see a hanging tag. Two 5 mm holes match a standard cage on 64 mm centres, the AirTag sits in a 32 mm well 8 mm deep, and a 1 mm snap lip keeps it in on cobbles. Print in PETG or TPU.
Click Get it now on this page: the example prompt is filled in for you after you sign in. The model renders in your browser — nothing to install — and previewing is free. Adjust any millimetre in the chat, then export a watertight STL or 3MF for 2 credits when you want to print.
Start from this working example and replace any number with what you measured: Model an AirTag bottle-cage mount 40×36×12 mm, 32 mm well 8 mm deep, two 5 mm holes on 64 mm centres, 1 mm snap lip, 1.6 mm PETG.
A steerer-cap or saddle-rail AirTag is a different hiding place. In SpeakCAD you generate and preview for free, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More everyday fixes
Wall-mounted leash hook with treat shelfA leash hook by the door means no more hunting under coats before a walk, and a small shelf holds treats and poop bags.Kindle Paperwhite one-hand page-turn grip ringA stick-on ring grip for the back of a Kindle Paperwhite (176.7 x 127.6 mm on the 2024 model) that slips over two fingers so the tablet hangs from your hand…Stokke Tripp Trapp cup holder clip for the side railA clip-on cup holder for the Stokke Tripp Trapp high chair that attaches to the wooden side rail and puts a sippy cup or snack pot within reach of a toddler…Hyundai Ioniq 6 charge-port holsterA garage holster that parks a CCS / NACS handle next to an Ioniq 6 so the cable does not sit in a puddle.Tesla Model Y Juniper charge-cable hookA hook that hangs a NACS charge cable on the Juniper Model Y frunk or garage wall so the cable is not on the floor.Peak Design Everyday Backpack zip AirTag pouchA pouch that slips an AirTag into the 25 mm webbing of an Everyday Backpack 20L or 30L so it is not hanging on a zipper.