1
Organizers & storage
Boss pedal patch cable and 9V power lead organizer
A gig-bag tray that keeps the small stuff behind a pedalboard sorted: 15 cm patch cables, 5.5 x 2.1 mm 9 V daisy-chain leads for Boss and Strymon pedals, spare 3PDT footswitches, Pedaltrain hook-and-loop strips and a pack of Dunlop picks. The 200 x 120 x 40 mm tray has a 60 mm wide channel with 15 mm posts for coiled patch cables, a row of six 12 mm bores for 9 V barrel plugs so leads stay untangled, a 40 x 40 mm pocket for footswitches and a lipped compartment for adapters, with 1.4 mm walls and 45 degree scoops so parts lift out. It prints flat with no supports and stacks under a second tray with corner pegs. Open the ready-made model free, resize it on your phone or computer, then download a print-ready STL, 3MF or G-code sliced for your printer, free.Opening the ready-made model and downloading it as STL or 3MF are free, no card; AI changes use credits, from Maker at $7.99 a month.No printer? We print this part and ship it to your door. See its priceUpdated
2
Adjust
Change its numbers in the viewer for free, or ask the AI in the chat: wall thickness, hole size, the thing it clips onto. AI changes use 2 credits per request (1 for a quick edit, 3 for a redesign), paid with a plan from Maker at $7.99 a month.3Print
Download a watertight STL or 3MF free, with your numbers and hand edits, or G-code sliced for your printer at the same price. After an AI change the download is included in every plan (4 credits without one).
Dimensions of the ready-made model (editable)
| Parameter | Value |
|---|---|
| outer width (X) | 200 mm |
| outer depth (Y) | 120 mm |
| outer height (Z) | 40 mm |
| wall thickness | 1.4 mm |
| floor thickness | 1.4 mm |
| 50mm deep cable channel | 51.4 mm |
| 26mm deep bore boss | 77.4 mm |
| shallow compartment depth from top | 4 mm |
Example prompt
Design a pedalboard accessory tray 200 x 120 x 40 mm with a 60 mm wide cable channel holding four 15 mm posts, six 12 mm bores 25 mm deep for 9 V barrel plugs, a 40 x 40 mm pocket, a 90 x 40 mm lipped compartment, 1.4 mm walls, 45 degree scoops and corner stacking pegs.
Fit notes
Guitarists have wildly different pedal counts and power schemes, so a fixed tray never suits. List your cables and adapters in SpeakCAD, preview the tray in the browser, change compartment sizes in the chat and download the STL.
Questions people ask about a Boss pedal patch cable and 9V power lead organizer
A gig-bag tray that keeps the small stuff behind a pedalboard sorted: 15 cm patch cables, 5.5 x 2.1 mm 9 V daisy-chain leads for Boss and Strymon pedals, spare 3PDT footswitches, Pedaltrain hook-and-loop strips and a pack of Dunlop picks. The 200 x 120 x 40 mm tray has a 60 mm wide channel with 15 mm posts for coiled patch cables, a row of six 12 mm bores for 9 V barrel plugs so leads stay untangled, a 40 x 40 mm pocket for footswitches and a lipped compartment for adapters, with 1.4 mm walls and 45 degree scoops so parts lift out. It prints flat with no supports and stacks under a second tray with corner pegs.
Click Open it free on this page and create a free account (no card): the ready-made model opens in your browser, on your phone or computer, nothing to install. Change its numbers in the viewer for free and download a watertight STL or 3MF free, or G-code sliced for your printer at the same price. An AI change in the chat uses 2 credits per request (3 for a redesign), and the download after it is included in every plan (4 credits without one). Start with Maker: 50 credits a month for $7.99, cancel anytime.
On this page: open the ready-made model free in a SpeakCAD account (no card), change any dimension in the viewer, then download the STL or 3MF free, or G-code sliced for your printer at the same price.
A shared STL is modelled for someone else's measurements. Here you open the ready-made model free, change it to your measurements in the viewer, then download a file sized for the part you actually own, free as STL or 3MF.
Yes. SpeakCAD slices the part on its servers with OrcaSlicer and your printer's official profile (380+ printers, including Bambu Lab, Prusa, Creality and Elegoo), and you download the G-code (a sliced .gcode.3mf for Bambu Lab printers). G-code sliced for your printer costs the same as the STL: included in every plan, free for a part you shaped by hand, 4 credits without a plan for a part with AI work in it. Pick your printer on the printers page to see its profile.
No. SpeakCAD runs in the browser on your phone or computer: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL, 3MF or sliced G-code.
Print it your way
More organizers & storage
Milwaukee Packout Compact Organizer bit railsReady-made, opens free. Two drop-in rails that turn a Packout Compact Organizer (48-22-8435) into a 1/4 inch hex-bit station with 20 pockets per rail, 6.6 mm hex by 12 mm deep.Sonicare DiamondClean travel-case insertReady-made, opens free. An insert that holds a DiamondClean handle and two heads in a 180 × 50 mm hard case with 0.4 mm clearance.AA and AAA battery storage box with lidReady-made, opens free. A two-level case that stores fresh cells in rows and keeps the used ones separate.Apple Watch band organizer drawer insert with lug railsReady-made, opens free. A drawer insert with a row of rails that copy the Apple Watch case slot, so Sport, Solo Loop and Braided bands for 42, 44, 45, 46 and 49 mm watches slide on…Gridfinity bin for Wera Kraftform screwdriver setReady-made, opens free. A 3 by 1 Gridfinity bin, 125.5 by 41.5 mm on the standard 42 mm grid, that holds six Wera Kraftform Plus screwdrivers upright by the blade so the handles fan…Wüsthof knife block insert with slotted grid for any knivesReady-made, opens free. A replacement insert for a Wüsthof, Zwilling or Victorinox wooden knife block whose slots no longer match the knives you own.