1
The prompt on this page opens in SpeakCAD already filled in — after sign-in too. The model renders in your browser. Preview is free.Everyday fixes
Hyundai Ioniq 6 charge-port holster
This is not a fixed STL. SpeakCAD generates the hyundai ioniq 6 charge-port holster to your millimetres, you adjust it in the chat, then you download and print it.2
Change any millimetre in the chat: wall thickness, hole size, the thing it clips onto. Iterations stay in the tab until it matches what you own.Adjust
3Print
Download a watertight STL or 3MF for 2 credits, drop it in your slicer, and print it. Small fit fixes re-download free.Get it nowThe example prompt comes with you, even through sign-in. Preview is free; a download costs 2 credits.
What a hyundai ioniq 6 charge-port holster is
A garage holster that parks a CCS / NACS handle next to an Ioniq 6 so the cable does not sit in a puddle. 80 mm saddle, two 5 mm holes. Print in PETG.
A handle on a hook kinks the cable. Describe the handle in SpeakCAD, preview the holster in the browser for free, then download the STL.
Example prompt
Create an Ioniq 6 charge holster, 80 mm saddle, two 5 mm holes, 2.4 mm PETG.
People also search
ioniq 6 charger holster stlioniq 6 plug holder 3d printhyundai charge port dockioniq 6 ev holster 3d model
Questions people ask about a hyundai ioniq 6 charge-port holster
A garage holster that parks a CCS / NACS handle next to an Ioniq 6 so the cable does not sit in a puddle. 80 mm saddle, two 5 mm holes. Print in PETG.
Click Get it now on this page: the example prompt is filled in for you after you sign in. The model renders in your browser — nothing to install — and previewing is free. Adjust any millimetre in the chat, then export a watertight STL or 3MF for 2 credits when you want to print.
Start from this working example and replace any number with what you measured: Create an Ioniq 6 charge holster, 80 mm saddle, two 5 mm holes, 2.4 mm PETG.
A handle on a hook kinks the cable. In SpeakCAD you generate and preview for free, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More everyday fixes
Nanit Pro floor-stand weight plateA 160 mm plate that adds printed mass and a 8 mm rubber-foot set under a Nanit floor stand so it does not walk.Meshtastic T-Echo belt clipA clip that puts a LilyGO T-Echo on a 40 mm belt with the antenna up, 2 mm PETG snap.Volvo EX30 console coin wellA well that sits in the EX30 centre console (about 140 × 80 mm) and holds coins, a card and a USB-C tip.Front fork mudguard for mountain bikeA fork-mounted mudguard sits under the crown and behind the arch to keep mud out of your eyes and off the stanchions.Safety razor stand with drip baseA safety razor left flat on the sink rusts the blade and stains the ceramic.MOLLE PALS pouch insert organizer for small gearA rigid insert that drops into a soft MOLLE admin pouch on a 5.11, Condor or Helikon pack and turns the sagging fabric into ordered slots for a Leatherman, a…