1
The prompt on this page opens in SpeakCAD already filled in — after sign-in too. The model renders in your browser. Preview is free.Everyday fixes
Rivian R1S door-pocket bottle stop
This is not a fixed STL. SpeakCAD generates the rivian r1s door-pocket bottle stop to your millimetres, you adjust it in the chat, then you download and print it.2
Change any millimetre in the chat: wall thickness, hole size, the thing it clips onto. Iterations stay in the tab until it matches what you own.Adjust
3Print
Download a watertight STL or 3MF for 2 credits, drop it in your slicer, and print it. Small fit fixes re-download free.Get it nowThe example prompt comes with you, even through sign-in. Preview is free; a download costs 2 credits.
What a rivian r1s door-pocket bottle stop is
A stop that keeps a 70 mm bottle from falling out of an R1S door pocket on a trail. The wedge is 80 × 30 × 20 mm with a 2 mm TPU face. Print two in TPU.
The R1S console tray and R1T tonneau clip are different parts. In SpeakCAD you set bottle diameter, preview the stop in the browser without paying, then download the STL.
Example prompt
Model an R1S door-pocket bottle stop 80×30×20 mm with a 2 mm TPU face, pair.
People also search
r1s bottle stop stlrivian r1s door pocket 3d printr1s bottle holderrivian door pocket wedge 3d model
Questions people ask about a rivian r1s door-pocket bottle stop
A stop that keeps a 70 mm bottle from falling out of an R1S door pocket on a trail. The wedge is 80 × 30 × 20 mm with a 2 mm TPU face. Print two in TPU.
Click Get it now on this page: the example prompt is filled in for you after you sign in. The model renders in your browser — nothing to install — and previewing is free. Adjust any millimetre in the chat, then export a watertight STL or 3MF for 2 credits when you want to print.
Start from this working example and replace any number with what you measured: Model an R1S door-pocket bottle stop 80×30×20 mm with a 2 mm TPU face, pair.
The R1S console tray and R1T tonneau clip are different parts. In SpeakCAD you generate and preview for free, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More everyday fixes
Tesla Model S Plaid key-card slotA slot that sits in the Model S Plaid console and parks two key cards plus a fob so they are not in a cup holder.Handlebar bike light mount adapterMany bike lights ship with a rubber strap that slips on cold mornings or a bracket sized for a 25.4 mm bar that will not stretch to a 31.8 mm one.Aquarium glass clip for airline tubingAirline and CO2 tubing float loose in an aquarium and kink over the rim.Apple Pencil Pro ergonomic grip sleeve TPUA slide-on TPU sleeve that thickens an Apple Pencil Pro or 2nd generation (8.9 mm across with one flat side, 166 mm long) to a 13 mm grip for long drawing se…Ryanair 40x20x25 cm cabin bag sizer templateA collapsible frame that reproduces the Ryanair small personal bag limit of 40 x 20 x 25 cm, so you can check a backpack or tote at home before it is measure…VW ID. Buzz front seat-gap trayA tray that fills the ID.