Everyday fixes

Google Pixel Buds Pro 2 case carabiner clip holder

A cradle that snaps around the Google Pixel Buds Pro 2 charging case (about 63 x 50 x 25 mm) and adds a carabiner loop so the earbuds clip onto a bag strap or belt loop and are never buried at the bottom of a rucksack. The cradle grips the lower 30 mm of the case with 0.3 mm clearance and two side tabs, leaves the lid free to open and the USB-C port exposed through a 12 mm notch, and carries a 6 mm loop on one end. Walls are 1.6 mm and it prints open side up in PETG.

Pixel Buds cases are a different shape from AirPods and Galaxy Buds, so a downloaded clip sleeve usually does not close. In SpeakCAD you describe the case and the carabiner you use, preview the cradle free in the browser, refine the tab grip in the chat, then download the STL.

Get it nowGenerate and preview for free, in your browser. A download costs 2 credits.

Design a snap-on cradle for a Google Pixel Buds Pro 2 case with an inner pocket of 63.6 x 50.6 x 25.6 mm and 30 mm tall walls, two 8 mm retaining tabs on the long sides, a 12 mm USB-C notch on the bottom, a 6 mm carabiner loop 4 mm thick on one end and 1.6 mm walls.

Change any number to match what you measured. The AI keeps the rest of the design consistent, and small follow-up edits after a download are free.

More everyday fixes

Apple Pencil Pro ergonomic grip sleeve TPUA slide-on TPU sleeve that thickens an Apple Pencil Pro or 2nd generation (8.9 mm across with one flat side, 166 mm long) to a 13 mm grip for long drawing se…Garage parking stop wheel chock for Tesla Model YA low parking stop that screws to the garage floor so the front wheel of a Tesla Model Y or any similar SUV settles into the same spot every time, leaving ro…Rimowa Original luggage tag holder with handle strapA rigid card holder that hangs from the telescopic handle of a Rimowa Original, Essential or Classic case, or an Away Carry-On and Samsonite spinner, and sho…Bottle cage tool holder insertA tool holder shaped like a water bottle drops into a spare bottle cage and carries a tube, CO2 cartridge and multitool without a saddle bag.Wall-mounted leash hook with treat shelfA leash hook by the door means no more hunting under coats before a walk, and a small shelf holds treats and poop bags.Shower shelf razor and bottle clipShower shelves fill up with bottles and razors that fall off the moment you reach for shampoo.

Make your google pixel buds pro 2 case carabiner clip holder now

Nothing to install and no CAD skills needed. Describe it, watch it render, download the STL or 3MF and print it tonight.

Get it nowBrowse the library
Looking for a ready-made version? Check the marketplace, where makers sell finished, rated models for credits.